Mamiya 211125, 645 AF manual Error Messages, Returning to the normal display

Page 40

Changing the Viewfinder Display in the Manual Mode"M" (select 'Fd")

When the exposure mode setting dial is set to "M", it is possible to display only the focus marks and flash charge mark in the viewfinder's LCD panel. This is useful when exposure settings will not change, and this information in the viewfinder could be otherwise distracting.

1.Set the shutter release mode selector lever to "S" (to turn the power on).

2.Press the “F1” Key for about 2 seconds to display "Func" on the external liquid crystal display panel.

3.Turn the front or rear dial to select "Fd".

4.Press the “F1” Key again to display "OF" or "On" (flashing).

Turn the front or rear dial to select "OF'.

Returning to the normal display

*Repeat steps 1 to 4 about, turn the front or rear dial to select "On", then press

the “SET” Button for 2 seconds.

Error Messages

This is displayed for 3 seconds when the end of the film is reached while shooting in the "C" (continuous advance) shutter release mode.

This is displayed when the shutter release button is pressed while the mirror is up when the exposure mode is set to "P" (program AE), "Av" (aperture priority AE) or "Tv" (shutter priority AE).

This is displayed when auto bracketing does not function, as follows:

•When the shutter release button is pressed while the exposure mode is set to "M", "X" or "T", this is displayed, the shutter is not released and the auto bracketing mode is canceled.

•When the shutter release button is pressed while shooting with the exposure mode set to "Av", "Tv" or "P" and there are fewer than three frames of film left, this is displayed, the shutter is not released and the auto bracketing mode is canceled.

If the magazine is removed while the multiple exposure mode is set, this is displayed and the multiple exposure mode is canceled after the magazine is replaced on the camera.

This is displayed when the batteries are discharged and the camera cannot operate. Please replace batteries with a fresh set.

These are displayed when a problem is detected during

shooting.

If the error display is not canceled when the shutter release button is pressed again, insert the Dark slide, half-press the shutter release button while pressing the roll film holder's manual film advance button to wind up the film, then contact your nearest Mamiya agent or service center.

77

78

Image 40

Contents Page Special Advice To Professional Photographers Congratulations on your purchase of the Mamiya 645 AF CameraNames of Parts and Functions Main Liquid Crystal Display LCD Magazine LCDContents 54 ~69 48 ~5370 ~86 Checking the Battery Power Be sure the batteries are placed with proper polarityAfter inserting the batteries, set the date and time. See Amount of film that can be taken with one set of batteriesDiopter Adjustment Replacing the diopter corrected lensAttaching Removing Attaching/Removing the LensAttaching the lens Installing the Battery in the Magazine Setting the Film SpeedShutter Safety Retraction Attaching/Detaching the MagazineAttaching DetachingWhen the pressure plate 120/220 is set erroneously Loading Film in the MagazineShutter Release Button/Holding the Camera Shutter Release ButtonHolding the Camera Insert the loaded film insert into MagazineTaking Photos in the Full Automatic Mode Focus Precautions for Film UnloadingUnloading the exposed film Removing a partially exposed film roll Exposure filmSingle Focus Mode S Manual Focus Mode MContinuous Focus Mode C Set the focus mode selector lever To M manual focus modeSubjects With Which Auto Focusing May Not Work Using the Focus Lock Function AF Supplemental Infrared LightOpen the back cover Camera Operation TestLector lever to S to turn Shifting the Program Program AE PAperture Priority AE Manual Mode M Shutter Priority AETime Mode T ModeAverage Exposure Metering Mode a Spot Exposure Metering Mode SAverage/Spot Auto Switching Exposure Metering Mode A-S Auto Display of the exposure compensation Viewfinders LCD panelSingle-Frame Mode Single-Frame Mode/Continuous ModeContinuous Mode Auto Bracketing Mode Automatic exposure operation in the auto bracketing modeMultiple Exposure Mode Canceling the Multiple Exposure ModeSelf Timer Mode Time Mode Bulb ModeExtended Exposure Modes Bulb and Time Modes AE Lock Mode How to meter and focus at two different distancesManual mode Using auto focus and auto exposureTaking Photos with the Mirror Up Depth of field Infrared PhotographyMetz Flash SCA3951 System Functions Flash PhotographyFor example Depth of Field Preview/Eyepiece Shutter Flash Photography with Flashes other than MetzDepth of Field Preview Button Eyepiece ShutterChanging The Focusing Screen Using the M645 Manual Focus LensesExternal Power Supply Electronic Dial Operations Front/Rear Dial Lock Mechanisms select dLocSetting the Date and Time Setting the Index NumberChecking the data to be superimposed Selecting the Data to be Superimposed select FuncData superimpose modes Error Messages Returning to the normal displayStrap/Using a Tripod/Auxiliary Release Contact Using a TripodIf the shutter cannot be released StrapSpecifications of 645AF Common Sense Camera Care and Practice Importance of Proper MaintenanceBatteries Care After-Sale Servicing Liquid Crystal Display