Jvc

13Using DV CONTROLLER screen operate camcorder until desired section appears (PLAY, FFWD, REW, PAUSE or SLOW MOTION).

14Click CAPTURE icon (looks like camera). This can be performed while playing the tape as well as while tape is paused.

15Transfer takes place and SEND will be blinking on the camcorder screen.

16Select SAVE AS by right clicking on downloaded image (to save a single picture, choose this option if you want to use NEWSOFT software later on to process/edit the image) or select SAVE ALBUM (if more images are to be saved together).

Below please find instructions for installation of software as well as transfer/download images to your computer.

--------------------------------------------------------------------------

To download stills images to the computer from the camera Memory.

1.Make sure the Computer is turned off.

2.Connect PC cable (RS-232C) to the port on the camera called PC (DIGITALSTILL) to the COM Port (RS-232C) on the PC.

3.Set the camcorder Select Switch to "PLAY".

4.Turn the computer on.

5.Make sure no other software is running in the background at this time.

6.Click START-PROGRAMS-MULTIMEDIA NAVIGATOR-MULTIMEDIA.

7.Click PICTURE NAVIGATOR icon

8.Click FILE-PREFERENCES-CONNECT and select COM Port cable or infrared connection and transfer speed (baud rate should match your computer COM Port settings, to check those access MY COMPUTER-CONTROL PANEL-SYSTEM-DEVICE MANAGER- PORTS –PROPERTIES)

9.Clicking on SAVE ALL will download all still images into computer.

10.Images will be saved in ALBUM folder with current # in MULTIMEDIA NAVIGATOR/PICTURE NAVIGATOR folder.

Sincerely,

Lennox Hearth GR-DVM80 manual Jvc