Swann 1060 warranty Specification of Housing

Page 2

INDEX

Introduction

2

This package comes with...

2

Opening the 1060 Housing

3

Installing a Camera

4

Connecting your Camera

5

Connecting the Heater / Blower Power

6

Mounting the 1060 Housing

7

Technical Specifications

7

Help Desk / Support Details

Back Cover

Warranty Information

Back Cover

INTRODUCTION

The Swann 1060 Camera Housing is designed to keep your CCTV camera safely enclosed to minimise the risk of damage by vandals or storms, and also from being affected by inclement weather. Its flexible design allows it to accommodate most CCTV cameras currently available.

The 1060 Housing also comes equipped with a low voltage heater bar and cooling fan to assist with keeping your images clear during periods of poor weather.

This package comes with...

1 x CCTV Camera Housing

2 x Cable Seal Plug with Rubber Grommet and Locking Nut

1 x Camera Mounting Screw

2 x Camera Base Plate Mounting Screws

1 x Imitation Camera Fascia

This Instruction Sheet

If any of these items are missing, please contact your retailer.

2

Mounting the 1060 Housing

Using the built in adjustable mounting points you can mount the 1060 Housing on a stand, pole or wall bracket. For alternative mounting options, the Universal Tilt and Swivel stand is available for separate purchase. Product code SW-A-CBI. Check with your local retailer for more details.

Technical Specifications

Specification of Housing

Dimensions: (L x W x H): 15¾”x 5½”x 41/3~ 400mm x140mm x112mm

Weight: 3¼lb ~ 1.5Kg (without camera)

Camera Opening Diameter: 2¾” ~ 72mm

Material: Case ~ Powder Coated Aluminium

Camera Opening ~ 1/8” (3mm) Glass

Camera Mounting plate ~ Impact Resistant Plastic

Specification of Heater / Blower

Power Requirement: 12 Volt DC ~ 0.5amp (500mA)

Temperature Activation: The fan or heater will activate automatically at the following temperatures. The fan and heater do not both run at the same time.

Hot Weather: Fan on at 98.6°F (37°C)

Cold Weather: Heater on at 59°F (15°C)

7

Image 2
Contents Camera Housing Specification of Housing Connecting the Heater / Blower Power Installing a Camera