Installing a Camera
Fit your CCTV camera to the camera mounting plate using the supplied mounting screw or the screws that may have come with your camera
Fit the camera mounting plate back into the mounting rails at the bottom of the housing and push down firmly until it clicks into place. Make any necessary adjustments to the distance from the glass or angle of the camera then screw in the supplied mounting screws to stop the mounting plate from moving.
4
Connecting your Camera
Insert the cables for the Camera Power, Camera Video and Heater / Blower through the seal plug on the underside of the back end of the 1060 housing and pass the cables through in to the housing. Once this is done tighten the nuts on the seal to prevent moisture and dust entering.
Connect the Video and Power wires you passed through the seal plug to your camera. Connect the opposite end of the cables to a video viewing device and check for correct operation.
5