Camera & Receiver Layout |
| Pairing Cameras |
|
|
|
Back side |
13 |
10 |
11 |
12 |
11 |
8 |
9 |
|
|
| 1 |
|
|
|
|
|
|
| M |
|
|
|
|
2 | 3 | 4 | 7 | 6 | 5 | 8 | 9 |
|
|
|
|
|
|
Camera Parts
1.Camera Lens
2.IR LED
3.Antenna
4.Power Jack
5.Camera Stand
6.1 CDS
7.Microphone
8.Cam Pair
9.Power adaptor
10.Power LED
11.U holder / U holder screw
12.T- bolt
13.Sunshield
Receiver
1.Receiver antenna
2.USB port
3.A/V out
4.DC Power
5.Signal LED
6.Pairing LED
7.Power LED
8.Power supply
9.Mini jack to RCA cable
Pairing Camera(s)
This function is available for
It is highly recommended to pair the camera before hardware installation.
Before pairing the camera, make sure camera is power ON, camera status indicators shown:
A. Simply pair the camera by selecting the desired channel in the OSD menu.
B. Only assign one camera to one channel. Channel memory will be overwritten if the next camera is assigned to the same channel.
C. Pairing new camera to channel 3, settings as shown:
D. Press | (Pair). |
E. System will count down within 60 seconds, system message as | |
shown: |
|
60
F. Within 10 seconds, press the Pair Key on the back of camera.
Installation
Pairing key
Step1: Hardware Set Up
Camera Assembly / Adjustment
A. Loosen U holder screws; slide the sunshield to ideal position. B. U bracket can be installed on camera top side for ceiling mount. C. Secure U holder with screws when done.
D. Adjust camera for proper view angle. Secure the stand with
3
G. Once pairing completed, camera and receiver status indicators appear as shown
Reset
A. Select the item “Reset” in the menu.
B.Press .
C.The original default settings of the system will be restored.
Reset
4 | 9 |