Receiver Setup (cont)
Step4: Advance Operation
Audio Vol | 10 | Audio Vol | 10 |
Scan Time | OFF |
|
|
Camera 1 | ON |
|
|
Camera 2 | ON |
|
|
Camera 3 | ON |
|
|
Camera 4 | ON |
|
|
Pair CAM | 1 2 3 4 |
|
|
Reset |
|
|
|
Installation (cont)
Camera Wall Mounting
A. Secure camera stand to the wall B. Secure camera U bracket to the
stand.
C. Adjust proper view angle then secure the joint with
Camera Ceiling Mounting
Using the Menu
You can Use (Left / Right / Up / Down) to select and change the settings.
By Pressing M (Menu), you can enter / exit OSD menu
Setting Audio Volume
You can Use (Left / Right) to change Audio Volume from 0 to 20.
A. Secure camera stand on the ceiling
B. Secure camera U holder to the stand.
C. Adjust proper view angle then secure the joint with
Setting Auto / Manual Scan
This function is available for
Scan Time will be turned off every time after you press (Cam) for manual scan
Step2: Connecting Devices
Scan Time | OFF |
Camera 1 | ON |
Camera 2 | ON |
Camera 3 | ON |
Camera 4 | ON |
Scan Time | 5 Sec |
Camera 1 | ON |
Camera 2 | ON |
Camera 3 | ON |
Camera 4 | ON |
A. Use | (Left / Right) to change Scan |
Time interval between OFF / 5 sec / 10 sec / 15sec. |
B. Default setting is OFF, system will not scan and camera display has to be manually assigned.
Skip Certain Camera(s) During Scan
Before setting Scan and Skip, make sure all cameras are paired to assigned channels. See next pages for detail.
A. Simply set the skip camera(s) OFF by pressing (Left / Right).
Time interval between OFF / 5 sec / 10 sec / 15sec.
B. Skip Camera 2 and 4 during 5 seconds Scan time interval, settings as shown:
Set up Camera
A. Secure the Antenna to the camera
B. Connect power cable to camera DC IN.
5V DC adapter ONLY
C. Plug on power adapter to wall outlet D. Camera now is ready to use
Set up Receiver
A. Turn on TV and switch to AV mode.
B. Connect AV cable Audio / Video
jack to TV AV IN. (Yellow=Video, | AV mode | |
White=Audio) | ||
| ||
C. Connect AV cable headset jack to |
| |
receiver AV OUT. |
|
TV Display as shown:
1 | 3 |
D. Connect power cable to receiver |
|
|
|
|
|
|
|
| |
DC IN. | Video |
| Audio | |
5V DC adapter ONLY |
|
|
|
|
|
|
|
| |
E. Plug power adapter to wall outlet |
|
|
|
|
F. Receiver now is ready to use |
|
|
|
|
AV out |
8 | 5 Seconds |
5 |