Important Information about this product

Connect the camera to your monitoring device (continued)

Your Maxi-Brite Camera is designed to transmit high quality color images to your Security Monitoring Device, Television or VCR and is operated by mains power. To help guide you through the process of setting up the Maxi-Brite Camera, we have outlined the steps and numbered each of the components required in the diagram below.

Connection to VCR, TV or MONITOR with RCA Sockets

2POWER

ADAPTOR

DVR or MONITOR

With RCA Sockets

Important Information about this product

!Best Results are achieved when the camera is looking down on the subject area.

!The hood can be used to stop sunlight entering the lens and causing the picture to wash out during bright daylight.

!Please test all devices before final installation as it is far easier to rectify problems at this stage.

!To avoid the risk of damage to your product, use only the supplied power adaptors.

!Areas with a bright background may cause degradation of the image. If possible position your camera so that it doesn’t point towards a very bright light source.

!Do not cut the DC power cable of the Camera to fit with another power source. This may result in damage to the Camera & any unauthorised modifications will void your warranty.

Tips for using your Swann Security camera

VIDEO AUDIO

OUT

VIDEO AUDIO

RCA VIDEO IN

4 3b

BNC to RCA adaptor

DC POWER

PLUG

2a	3d	1b DC socket
	3a	1a BNC
	BNC	Female
	BNC
Extension	male connector
Cable with

BNC Male

Connectors

1.	Deterrence is the best and most cost effective security method for:
	- preventing criminal activity before it occurs is preferable to, and cheaper
	than, cleaning up after it occurs
	- the Swann Maxi-Brite Camera is an example of cost effective security
	utilising the 'art of deterrence' to outsmart thieves and criminals
2.	Always place cameras high enough that they can't be closely inspected or
	easily accessed

Connection to DVR or MONITOR with BNC Sockets

3. Position cameras and dummies where they can be easily seen for maximum

deterrence

DVR or MONITOR With BNC Sockets

VIDEO AUDIO

OUT

VIDEO AUDIO

BNC VIDEO IN

POWER

ADAPTOR

Extension

Cable with

BNC Male

Connectors

DC POWER

CONNECTOR

DC socket

BNC Female

4.	Position a monitor where it can be seen but not touched
5.	If you have more than one camera use a monitor with channel switching
	function, a Quad Processor or DVR with multiple views to show potential
	offenders the level of coverage you have protecting your site.
6.	Add extra Swann dummy cameras to give the impression of heightened
	security
7.	Purchase a Swann DVR to monitor and record activity on your cameras.
	Depending on the settings used, DVRs can record for months.