Yamaha Audiogram 3 owner manual Control Panel

Page 18

Controls and Functions

Control Panel

q e w

1PHANTOM +48V Switch/Indicator

This switch toggles phantom power on and off. If you set the switch on (), the AUDIOGRAM supplies phantom power to the MIC/INST jack (XLR-type) 8. Turn this switch on when using a phantom-powered condenser microphone.

•Be sure to leave this switch off

() if you do not need phantom

CAUTION power.

•When turning the switch on, be sure that only a condenser micro- phone is connected to the MIC/ INST input jack. Other devices may be damaged if connected to phantom power. This precaution does not apply to balanced dynamic microphones or instru- ments with the phone jack, how- ever, as these will not be affected by phantom power.

•To prevent damage to speakers, be sure to turn off audio system (monitor speakers) before turn- ing this switch on or off. We also recommend that you set the OUT LEVEL control to the minimum position. Neglect of these pre- cautions may result in large noise bursts that may damage your equipment, your ears, or both.

2MIC/INST Switch

Set this switch according to the type of device connected. Select MIC () if a microphone is connected, or INST () if an electric guitar or bass is connected.

NOTE If a device is not connected to the MIC/INST jack, set this switch to MIC (). Otherwise noise may occur.

18AUDIOGRAM 3 Owner’s Manual

u

e

t y r

3LEVEL Controls

Adjusts the level of the channel signal. Use these controls to adjust the balance between the channels.

4POWER Indicator

This indicator lights when power is applied to the AUDIOGRAM interface via the USB cable (supplied) that connects it to the computer.

5Level Indicators

These indicators show signal levels prior to the OUT LEVEL control 6. The SIGNAL LED lights when a signal is present, and the PEAK LED lights when the signal reaches or exceeds clipping level. Adjust the input channel LEVEL controls 3 so that the PEAK LEDs flash only briefly on occasional high-level peaks or not at all.

6OUT LEVEL Control

Adjusts the signal level sent to the STE- REO OUT jacks 0. This allows you to adjust the overall volume without changing the relative volume balance among the channels.

When connecting or disconnecting the USB or audio cables be sure to CAUTION turn the OUT LEVEL control all the

way down.

7USB Connector

Connects the AUDIOGRAM interface to a USB port on your computer via the sup- plied USB cable. In addition to transferring audio data between the AUDIOGRAM interface and the computer, the USB cable supplies power from the computer to the AUDIOGRAM interface.

NOTE Yamaha recommends that you use a USB cable with a length of 1.5 meter or less.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents USB Audio Interface FCC Information U.S.A Precautions Special Notices Introduction Computer System Requirements Cubase AI 4 System RequirementsSetup Installing Cubase AI Connecting to the Audiogram interfacePowering Up the System Turn the power to the audio system monitor speakersRecording with Cubase AI Adjusting LevelCubase AI Setup Set the computer output to the maximum levelDouble-click the Application → Cubase AI Quick Guide Preparing to Record Recording and Playback Click the Transport panel Record button to begin recordingRecording with maximum quality and minimum noise Mixing with Cubase AI → RoomWorks SEClick Export Control Panel Input Signal Flow Rear PanelInput ports are not shown Windows Vista Audiogram interface won’t turn onSystem doesn’t work properly No soundTroubleshooting Recorded sound is too low in levelSound is intermittent or distorted Dimensional Diagrams General SpecificationsBlock Diagram and Level Diagram AudiogramSoftware License Agreement 131 Brazil WN49520

Audiogram 3 specifications

The Yamaha Audiogram 3 is an entry-level USB audio interface designed to simplify the recording process for musicians, podcasters, and content creators. With its compact and user-friendly design, the Audiogram 3 makes it easy for users to capture high-quality audio with minimal setup time. This versatile device is particularly well-suited for those who are new to audio recording, while still offering features that experienced users will appreciate.

One of the standout features of the Audiogram 3 is its three input channels, which provide flexibility for various recording scenarios. The interface includes one XLR input for microphones, along with two additional inputs that can be used for instruments or line-level sources. This versatility allows users to record vocals, guitars, keyboards, and more, making it an excellent choice for solo artists or small ensembles.

The Audiogram 3 is equipped with high-quality microphone preamps, which are essential for ensuring clear and detailed audio capture. These preamps are designed to deliver low noise and high headroom, enabling users to achieve professional-sounding recordings without the need for additional external equipment. Furthermore, the device features a 24-bit/96kHz digital converter, which ensures that every nuance of the audio is accurately captured during the recording process.

Another notable technological aspect of the Audiogram 3 is its seamless integration with computer-based recording software. The unit is class-compliant, meaning it can be used with both Windows and Mac systems without the need for additional drivers. This plug-and-play functionality makes it an ideal choice for individuals who want to dive into audio recording without dealing with complicated software installations.

The Audiogram 3 also comes with a software bundle that includes a selection of digital audio workstation (DAW) programs and plug-ins. This enables users to start making music or producing podcasts right out of the box. The inclusion of these tools can greatly enhance the production process, providing users with everything they need to mix, edit, and finalize their projects.

In terms of design, the Yamaha Audiogram 3 is compact and portable, making it the perfect companion for those who need a reliable recording solution on the go. Its sturdy build quality ensures that it can withstand the rigors of daily use, while the intuitive layout of controls allows for easy operation even in dimly lit environments.

In summary, the Yamaha Audiogram 3 is a feature-packed USB audio interface tailored for those looking to record high-quality audio with ease. Its combination of high-grade preamps, versatile input options, and user-friendly design makes it a valuable tool for any aspiring audio creator.
Top Page Image Contents