Yamaha Audiogram 3 owner manual Rear Panel, Input Signal Flow

Page 19

Controls and Functions

Rear Panel

!1 !0

8MIC/INST Input Jack

Microphones and instruments such as gui- tars can be connected here using XLR or phone jack cables. Set the MIC/INST switch 2 to MIC or INST according to the type of device connected.

XLR-type Phone-type

NOTE You can directly connect an elec- tric guitar or bass without the need for a separate DI (Direct Injection) box or amp simulator.

9LINE Input Jacks

These inputs are intended mainly for use with instruments and equipment having stereo outputs, such as a synthesizer or CD player.

■Input Signal Flow

Adjust the recording level as well as the balance between channels.

Input

3 LEVEL Record

 

controls

o i

If devices are connected to both phone and pin jacks, only the signal from the device connected to the phone jacks is input.

Phone-typePin-type

0STEREO OUT Jacks

These output the mixed signal from chan- nels 1 and 2. The output level can be adjusted using the OUT LEVEL control. These jacks would typically be connected to an audio system (monitor speakers).

NOTE You can use either the phone jacks or pin jacks but not both at the same time. If both jacks are used, the signal is only output from the phone jacks.

APHONES Jack

Connects a pair of headphones to this jack. The PHONES jack outputs the same signal as the STEREO OUT jacks.

5Level

indicator

Adjusts the

 

 

monitor level.

Playback 6 OUT LEVEL

Output

control

 

Cubase AI

AUDIOGRAM 3 Owner’s Manual

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents USB Audio Interface FCC Information U.S.A Precautions Special Notices Introduction Cubase AI 4 System Requirements Computer System RequirementsSetup Connecting to the Audiogram interface Installing Cubase AITurn the power to the audio system monitor speakers Powering Up the SystemSet the computer output to the maximum level Adjusting LevelCubase AI Setup Recording with Cubase AIDouble-click the Application → Cubase AI Quick Guide Preparing to Record Click the Transport panel Record button to begin recording Recording and PlaybackRecording with maximum quality and minimum noise → RoomWorks SE Mixing with Cubase AIClick Export Control Panel Rear Panel Input Signal FlowNo sound Audiogram interface won’t turn onSystem doesn’t work properly Input ports are not shown Windows VistaRecorded sound is too low in level TroubleshootingSound is intermittent or distorted General Specifications Dimensional DiagramsAudiogram Block Diagram and Level DiagramSoftware License Agreement 131 Brazil WN49520

Audiogram 3 specifications

The Yamaha Audiogram 3 is an entry-level USB audio interface designed to simplify the recording process for musicians, podcasters, and content creators. With its compact and user-friendly design, the Audiogram 3 makes it easy for users to capture high-quality audio with minimal setup time. This versatile device is particularly well-suited for those who are new to audio recording, while still offering features that experienced users will appreciate.

One of the standout features of the Audiogram 3 is its three input channels, which provide flexibility for various recording scenarios. The interface includes one XLR input for microphones, along with two additional inputs that can be used for instruments or line-level sources. This versatility allows users to record vocals, guitars, keyboards, and more, making it an excellent choice for solo artists or small ensembles.

The Audiogram 3 is equipped with high-quality microphone preamps, which are essential for ensuring clear and detailed audio capture. These preamps are designed to deliver low noise and high headroom, enabling users to achieve professional-sounding recordings without the need for additional external equipment. Furthermore, the device features a 24-bit/96kHz digital converter, which ensures that every nuance of the audio is accurately captured during the recording process.

Another notable technological aspect of the Audiogram 3 is its seamless integration with computer-based recording software. The unit is class-compliant, meaning it can be used with both Windows and Mac systems without the need for additional drivers. This plug-and-play functionality makes it an ideal choice for individuals who want to dive into audio recording without dealing with complicated software installations.

The Audiogram 3 also comes with a software bundle that includes a selection of digital audio workstation (DAW) programs and plug-ins. This enables users to start making music or producing podcasts right out of the box. The inclusion of these tools can greatly enhance the production process, providing users with everything they need to mix, edit, and finalize their projects.

In terms of design, the Yamaha Audiogram 3 is compact and portable, making it the perfect companion for those who need a reliable recording solution on the go. Its sturdy build quality ensures that it can withstand the rigors of daily use, while the intuitive layout of controls allows for easy operation even in dimly lit environments.

In summary, the Yamaha Audiogram 3 is a feature-packed USB audio interface tailored for those looking to record high-quality audio with ease. Its combination of high-grade preamps, versatile input options, and user-friendly design makes it a valuable tool for any aspiring audio creator.
Top Page Image Contents