TO REMOVE THE CARD
1
Turn off the camera and open the Battery / Card Cover, as shown in the illustration.
2
Push the card until it clicks and pull out it.
3
Close the Battery / Card Cover.
Slide the Battery / Card Cover in the direction shown by the arrow until it clicks and be locked.
CAUTION !!
•Never do any of the following while the Busy Lamp is on. (The Busy Lamp indicates when the camera is writing, reading, or erasing images from the card. Doing any of the following may cause the image data to be lost or corrupt.)
1.Do not remove the card.
2.Do not remove the battery.
3.Do not apply shock or vibrations to the camera.
TIP
•If the camera is turned off while the Busy Lamp is on, the camera will remain on until it has finished accessing the card.
38