SETTING A CUSTOM WHITE BALANCE
For more precise control of the white balance setting or when photographing under unusual lighting conditions, the "Set Custom WB" option can be used to capture a sample of neutral object in a scene to be used for color correction.
1
To capture a custom white balance image, please select [
Capture Settings] (P.26) → [White Balance] → [Custom], then press the 
button.
2
Under the lighting conditions that will be used for the final photograph, frame a white color object, such as a sheet of white paper or a white wall, so that it fills the frame in the center of the color LCD monitor, and then press the shutter button.
If a valid white balance settings was captured, a message “White balance image captured successfully” will appear on the color LCD monitor that the white balance image was captured successfully.
If the capture was not successful, “Failed ! Please retry the custom WB capture.” will be displayed on the color LCD monitor.
Press the shutter button to capture a white balance image once again.
To dismiss the capture, press the 
button.
TIP
•When the 
button is pressed in white balance capture display, current white balance setting will be set.
55