Pioneer GEX-P6400TV operation manual Resetting the Microprocessor, OSD Switch Setting, OSD on

Before Using This Product

Resetting the Microprocessor

The microprocessor must be reset under the following conditions: When using this product for the first time after installation. When the machine fails to operate properly.

When strange (incorrect) messages appear on the display.

When setting the position of the OSD switch on the right side of this product.

If you reset the microprocessor, memorized broadcast stations and other information is erased, and this product returns to its initial settings.

•To reset the microprocessor, press the RESET button on the unit with a pen tip or other pointed instrument.

OSD Switch Setting

2 OSD

TV 1

Set the OSD (On Screen Display) switch on the right side of this product to the appropriate position with a pen tip or other pointed instrument, for the component you are combining it with.

(1) OSD OFF

When combining with a PIONEER AV Receiver (e.g. AVH-P6400CD, AVH-P6400).

•Select this setting when not using this product’s OSD indications in the display.

(2)OSD ON

When combining with a PIONEER Display featuring an AV-BUS input (e.g. AVX- P7300DVD, AVX-7300).

•Select this setting when using this product’s OSD indications in the display.

Note:

• As output from the Rear Display output has no relation to the OSD switch’s ON/OFF setting, OSD

5

indications are always displayed.