Speco Technologies CVC6146SCFF instruction manual ISO14001

Page 2

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER(OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

ISO14001

The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

INFORMATION - This equipment has been tested and found to comply with

limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

WARNING - Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

CAUTION : To prevent electric shock and risk of fire hazards: Do NOT use power sources other than those specified. Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and should conform to all local codes.

- 2 -

Image 2
Contents Line Color Dome Camera Focus Free ISO14001 Contents Precautions Sefety Instructions Line color dome camera General Features 3D Filtering Method of Newly Advanced DNR FunctionMenu Set-Up MenuSpecial Menu Motion Area Select Area Area Display on / OFFMenu Set Up Changing menu settings using the Left or Right button LensExposure Agcauto Gain Control Back LightBLC ReturnBLC on Hsblc OFF WDRdigital WDR White Balance ATW Auto Tracking White BalanceDay / Night 3DNR Special ▷ → Cases where the wrong Camera ID has been input CAM1 Mirror on Motion Area Select Area Display Left / Right ② Area Display OFF Disabled On Activates area display Adjust Reset Trouble Shooting Problem Possible CauseProduct Warranties and Information Effective July 8 New Highway Amityville, NY 800 645