| BLC SETUP |
LEVEL | LOW |
TOP | 38 |
BOTTOM | 109 |
LEFT | 54 |
RIGHT | 121 |
Press Set to Return
HLC SETUP
LEVEL | MIDDLE |
LIMITS | NIGHT ONLY |
MASK COLOR | BLACK |
MASK TONE | 1 |
TOP | 5 |
BOTTOM | 120 |
LEFT | 5 |
RIGHT | 172 |
Press Set to Return
☞ NOTE
■ Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance. ■ When dark, the HLC is only activated when a bright light exceeding a specific size in NIGHT ONLY mode.
■ The HLC is not activated in day light or when bright light is not present at night in NIGHT ONLY mode.
■ BLC Function doesn't work in the B/W mode of the DAY/NIGHT menu.
● DNR3 Setting
This function reduces the background noise in a low luminance environment.
1.When the SETUP menu screen is displayed, select 'DNR3' by using the Function Setup switch so that the arrow indicates 'DNR3'.
MAIN SETUP
1.LENS | DC |
2.EXPOSURE |
|
3.WHITE BAL | ATW |
4.SSDR | OFF |
5.BACKLIGHT | OFF |
6.DNR3 | ON |
7.DAY/NIGHT | AUTO |
8.SPECIAL |
|
9.EXIT | SAVE |
2.Select a desired mode using the Function Setup switch. ◆ OFF : Deactivates DNR3. Noise is not reduced.
◆ ON : Activates DNR3 so that noise is reduced.
19