3. Set the DNR3 mode to 'ON' and press the Function Setup switch. Then you can adjust the noise reduction level.
☞ NOTE
■ You cannot set the DNR3 to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu is ‘OFF’.
■When adjusting the noise reduction level in the DNR3 mode, remember that the higher the level set, the more the noise level will be reduced, as will the brightness of the image.
●Day/Night Setting
You can display pictures in color or black and white.
1.When the SETUP menu screen is displayed, select 'DAY/NIGHT'by using the Function Setup switch so that the arrow indicates 'DAY/NIGHT'.
MAIN SETUP
1.LENS | DC |
2.EXPOSURE |
|
3.WHITE BAL | ATW |
4.SSDR | OFF |
5.BACKLIGHT | OFF |
6.DNR3 | ON |
7.DAY/NIGHT | AUTO |
8.SPECIAL |
|
9.EXIT | SAVE |
2.Select a desired mode using the Function Setup Switch according to the picture display you want.
◆ COLOR : The picture is always displayed in color.
◆ B/W : The picture is always displayed in black and white.
- BURST MODE : You can turn on or off the burst signal on B/W mode.
- IR MODE : When IR LED is turned on in B/W, the objects can be clearly identified due to the function that decreases screen saturation of objects within a short distance.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the range according to | B/W MODE SETUP | |
the location of objects. | 1.BURST MODE | ON |
- IR LEVEL : Select LOW when objects appears within a | 2.IR MODE | ON |
short distance or select HIGH when objects | 3.IR LEVEL | HIGH |
4.RETURN |
| |
appears within a long distance on the screen. |
| |
|
| |
20