Power Indicator/Protection Mode LED | Audiovox AMP-610 specification

1Power Indicator/Protection Mode LED

The Power Indicator LED will light to indicate that the unit is connected to the battery and that the Remote Turn-On terminal is receiving +12 volts, thus turning on the amplifier.

This LED illuminates red to indicate that the self-protection circuits have been activated and have shut off operation of the amplifier. The protection circuits may be triggered by the temperature of the unit rising above a safe level or by an overload condition. If activated by a rise in temperature, the unit will resume operation after cooling off to a normal operating range. If activated by an overload condition, the source of the overload must be found and corrected to resume operation of the amplifier. Most overload conditions are caused by mis-wiring or operation into incorrect speaker loads. Re-check all wiring and connections if this situation occurs and correct as necessary.

2Level (Gain) Control

The amplifier is capable of operating from sources supplying a wide range of input levels. The Level control should initially be set to the mid-rotation position. If it is found that there is not enough output even when the volume control on the car stereo is at its maximum setting, adjust the Level control to increase the output from the system. If, however, there is still output from the amplifier when the car stereo volume control is at its minimum setting, or the output level increases too fast with a small rotation of the volume control, adjust the Level control to decrease the output from the system. Once the correct setting is found, this control should not require any further adjustment.

3Low Level Input Connections

If low-level outputs are provided from the car stereo, it is recommended that the low-level inputs be used for lowest distortion and best performance. Use good quality shielded audio cables with RCA plugs at both ends to connect the stereo to the amplifier and keep the cable lengths to a minimum to avoid noise.

CAUTION: Use either the low-level or the high-level inputs on the amplifier.

DO NOT use both input levels at the same time.

-5-

AMP-610 specifications

The Audiovox AMP-610 is a versatile and powerful amplifier designed to enhance audio performance in various settings, from home theaters to mobile audio systems. Known for its robust build quality and user-friendly features, the AMP-610 caters to audiophiles and casual listeners alike.

One of the standout features of the AMP-610 is its impressive output power. With a power rating of up to 600 watts, this amplifier delivers clear and powerful sound, capable of driving high-performance speakers with ease. Whether you're listening to music at high volumes or enjoying an immersive movie experience, the AMP-610 ensures that every audio nuance is handled with precision.

In terms of technology, the AMP-610 incorporates advanced Class D amplification. This technology allows for greater efficiency compared to traditional amplification methods, resulting in less heat generation and a smaller form factor. The compact design makes it easy to fit into tight spaces, which is particularly advantageous for car audio installations and small home setups.

Another significant feature of the Audiovox AMP-610 is its built-in crossovers. This functionality allows users to tailor sound output to their specific needs, ensuring that frequencies are accurately distributed among the speakers. Whether you’re using subwoofers or satellite speakers, the adjustable crossover ensures optimal audio clarity and coherence across the frequency spectrum.

The AMP-610 also comes equipped with a range of connection options, including RCA inputs and speaker terminals. This versatility allows for easy integration with a variety of audio systems, making it suitable for both new installations and retrofitting existing setups. The amplifier's compatibility with various audio sources means that users can enjoy high-quality sound from their favorite devices without hassle.

In addition to its technical features, the Audiovox AMP-610 boasts a sleek and modern aesthetic. Its design not only complements contemporary audio systems but also features ample ventilation to prevent overheating during extended use.

Overall, the Audiovox AMP-610 is a reliable choice for those looking to amplify their audio experience. With its powerful output, advanced technologies, and user-friendly features, it represents an excellent investment for anyone serious about sound quality. Whether for home entertainment or mobile use, the AMP-610 delivers exceptional performance that satisfies even the most demanding listeners.