Audiovox AMP-610 manual High Level Input Connection

Page 8

4High Level Input Connection

If the car stereo does not provide low-level outputs, the amplifier may be connected via the speaker (high-level) outputs fromthe stereo. Wire the speaker leads from the car stereo to the 5-pin adaptor harness as shown in the diagram (shielded cable is not required for this application) and plug the connector into the mating High-Level Input socket on the amplifier. Carefully splice and insulate all wire connections.

5Fuse

The circuitry of the amplifier is protected from damage by an automotive-type fast-blow fuse. If fuse replacement is necessary, use only fuses of the same ampere rating as originally supplied with the unit. The use of fuses with incorrect ratings may cause serious damage to the amplifier. If fuses blow consistently, carefully check all electrical connections to the unit.

6Power Connection

The battery terminal (BATT) must be connected directly to the positive terminal of the vehicle battery to provide an adequate voltage source and minimize noise. Connecting the battery terminal lead to any other point (such as the fuse block) will reduce the power output and may cause noise and distortion. Use only #16 gauge or thicker (smaller gauge #) wire for this lead and connect it to the terminal of the battery after all other wiring is completed.

7Ground Connection

The ground terminal (GND) connection is also critical to the correct operation of the amplifier. Use a wire of the same gauge as the power connection (#16 or thicker) and connect it between the ground terminal (GND) of the amplifier and a metal part of the vehicle close to the mounting location. This wire should be as short as possible and any paint or rust at the grounding point should be scraped away to provide a clean metal surface to which the end of the ground wire can be screwed or bolted.

8Remote Turn-On Connection

The amplifier is turned on by applying +12 volts to the remote turn-on terminal (REM). The wire lead to this terminal should be connected to the "Auto-Antenna" lead from the car stereo which will provide the +12 volts only when the car stereo is turned on. If the car stereo does not

-6-

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Owners Manual Controls and Indicators IndexSpecifications High Performance Stereo AmplifierPrecautions Installation Instructions Installation DiagramControls and Indicators Power Indicator/Protection Mode LED High Level Input Connection Wiring Instructions Speaker ConnectionsChannel and MIXED-MONO Input Wiring Diagram Speaker OutputsChannel and MIXED-MONO Output Wiring Diagram Chassis Ground CAR Stereo AUTO-ANTENNALEADChannel Input Wiring DIAGRAMLOW-LEVELOUTPUT Wiring on Channel Output Wiring Diagram Channel Mono Bridged Input Wiring Diagram Channel Mono Bridged Output Wiring Diagram 90 DAY/12 Month Limited Warranty

AMP-610 specifications

The Audiovox AMP-610 is a versatile and powerful amplifier designed to enhance audio performance in various settings, from home theaters to mobile audio systems. Known for its robust build quality and user-friendly features, the AMP-610 caters to audiophiles and casual listeners alike.

One of the standout features of the AMP-610 is its impressive output power. With a power rating of up to 600 watts, this amplifier delivers clear and powerful sound, capable of driving high-performance speakers with ease. Whether you're listening to music at high volumes or enjoying an immersive movie experience, the AMP-610 ensures that every audio nuance is handled with precision.

In terms of technology, the AMP-610 incorporates advanced Class D amplification. This technology allows for greater efficiency compared to traditional amplification methods, resulting in less heat generation and a smaller form factor. The compact design makes it easy to fit into tight spaces, which is particularly advantageous for car audio installations and small home setups.

Another significant feature of the Audiovox AMP-610 is its built-in crossovers. This functionality allows users to tailor sound output to their specific needs, ensuring that frequencies are accurately distributed among the speakers. Whether you’re using subwoofers or satellite speakers, the adjustable crossover ensures optimal audio clarity and coherence across the frequency spectrum.

The AMP-610 also comes equipped with a range of connection options, including RCA inputs and speaker terminals. This versatility allows for easy integration with a variety of audio systems, making it suitable for both new installations and retrofitting existing setups. The amplifier's compatibility with various audio sources means that users can enjoy high-quality sound from their favorite devices without hassle.

In addition to its technical features, the Audiovox AMP-610 boasts a sleek and modern aesthetic. Its design not only complements contemporary audio systems but also features ample ventilation to prevent overheating during extended use.

Overall, the Audiovox AMP-610 is a reliable choice for those looking to amplify their audio experience. With its powerful output, advanced technologies, and user-friendly features, it represents an excellent investment for anyone serious about sound quality. Whether for home entertainment or mobile use, the AMP-610 delivers exceptional performance that satisfies even the most demanding listeners.
Top Page Image Contents