Speco Technologies HT-7248FFI manual Next page Menu Functions, Camera ID, Color Auto / On

Page 15

NEXT PAGE Menu Functions

1. CAMERA ID

UP, DOWN, LEFT, RIGHT menu control = Select a character, then press (SETUP)MENU to accept it.

The character is saved and the title cursor at the bottom of the screen moves to the next position.

→ = Go back or forward in the title name to make changes. CLR = Delete the entire name and start again.

POS = Position the camera title on the screen. Press (SETUP)MENU to confirm the position.

END = Accept the new name.

2.COLOR (Auto / On)

Sets the camera to either automatic color/black and white or full-time color mode.

*Auto : The camera will switch into B/W mode under low light conditions.

*Color : Always display a color picture.

OSD Key may not work for 3 seconds when COLOR/ BW mode is changed

14

Image 15
Contents HT7248FFi Appliance Troubleshooting Contents Package Contents Precautions Camera InstallationFeatures OSD SettingPackage Contents Precautions Connect Power Cable Camera InstallationChameleon Cover Installation DIP Switch setting for RS485 Lens adjustment for Zoom Joy stickControl Board Baud rate Setting 3 4 5 Address SettingIntensifier SLCOSD Electronic DAY/NIGHTManual / Auto Iris Lens Operating your camera OSD Function Setup MenuSLC Speco Light Compensation Backlight White BAL. Option ATW / Manual / AWCNext Auto Gain Low / Middle / HighReduce Noise Low / Middle / High IntensifierNext page Menu Functions Camera IDColor Auto / On Motion Sync INT / Line LockSharpness ResetPrivacy MirrorMotion Page Lens Type SpecificationsSide View TOP View DimensionsWarranty Memo VER New Highway Amityville, NY