Speco Technologies HT-7248FFI manual Precautions

Page 5

PRECAUTIONS

THIS DOME CAMERA SHOULD BE ONLY INSTALLED BY QUALIFIED PERSONNEL

TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE PROPER POWER CABLE. THE DOME COVER SHOULD BE TREATED WITH CARE

DO NOT CELAN THE COVER WITH AN ABRAISIVE CLEANING MATERIAL - PLEASE USE A SOFT CLOTH OR TISSUE TO CLEAN THE DOME COVER

THERE ARE NO USER-SERVICEABLE PARTS INSIDE. PLEASE DO NOT DISASSEMBLE THIS CAMERA OTHER THAN TO MAKE INITIAL ADJUSTMENTS

PLEASE USE A UL APPROVED REGULATED 24 VOLT AC OR 12 VOLT DC POWER SUPPLY

PLEASE USE APPROPRIATE LOW VOLTAGE POWER CABLE TO PREVENT FIRE OR ELECTRICAL SHOCK

PLEASE INSURE THAT YOUR INSTALLATION AREA CAN SUPPORT THE WEIGHT OF THE CAMERA

PLEASE HANDLE THIS CAMERA CAREFULLY:

-DONT USE A STRONG OR ABRASIVE DETERGENT WHEN CLEANING THE CAMERA.

-DONT EXPOSE THE CAMERA TO DIRECT SUN

4

Image 5
Contents HT7248FFi Appliance Features Contents Package Contents Precautions Camera InstallationOSD Setting TroubleshootingPackage Contents Precautions Connect Power Cable Camera InstallationChameleon Cover Installation Control Board DIP Switch setting for RS485Lens adjustment for Zoom Joy stick Baud rate Setting 3 4 5 Address SettingIntensifier SLCManual / Auto Iris Lens OSDElectronic DAY/NIGHT Operating your camera OSD Function Setup MenuSLC Speco Light Compensation Backlight White BAL. Option ATW / Manual / AWCReduce Noise Low / Middle / High Auto Gain Low / Middle / HighIntensifier NextColor Auto / On Next page Menu FunctionsCamera ID Motion Sync INT / Line LockPrivacy ResetMirror SharpnessMotion Page Lens Type SpecificationsSide View TOP View DimensionsWarranty Memo VER New Highway Amityville, NY