Snapper EMRP216518B important safety instructions Connector Adapter Flange

Section 2 - OPERATING INSTRUCTIONS

2.8INSTALLATION, COLLECTOR GRASS BAG (Optional accessory on some models)

STEP 1: Install the grass bag adapter and secure to the side and top of the deck with the two nuts provided on the machine. Slot in front edge of adapter must be under nut located on top of deck. See Figure 2.9.

STEP 2: Install grass catcher by sliding connector over flange of adapter. See Figure 2.11

WARNING

DO NOT operate without entire Grass Catcher or guard in place. Grass Catcher components are subject to deterioration during normal use. Inspect frequently and replace worn or damaged components immediately.

CONNECTOR

ADAPTER

FLANGE

CONNECTOR

FIGURE 2.11

FIGURE 2.13

STEP 3: Grasp front and rear handles on bag and begin bringing them together. Guide right and left Bi-folds towards center of bag. See Figure 2.12

BRING HANDLES

TOGETHER. GUIDE

FOLDS TOWARDS

CENTER OF BAG

FIGURE 2.14

FIGURE 2.12

STEP 4: Guide connector plate on rear handle into slot on front handle. See Figure 2.13.

STEP 5: Attach grass bag hooks over middle handle cross bar. See Figure 2.14.

10