GETTING STARTED
To remove the memory card, gently press on the edge of the card and release it. Pull the card out and close the battery cover.
About Camera Memory
The digital camera is equipped with internal memory. If the memory card is not inserted in the camera, all images and movie clips recorded by the camera will be stored in the internal memory. If the memory card is inserted, images and movie clips are stored on the memory card.
DCF Protocol
The DCF protocol defines the format for image file data as well as the directory structure for the memory card. Images that are taken by a DCF camera can be viewed on
SETTING THE DATE AND TIME
When the camera is first turned on, the date and time setting will not be correct. So before using, be sure to set date and time.
1.Press the MENU button, using 
or 
to select SETUP (
) and press the SET button.
2.Press 
or 
to select DATE & TIME ( 
) then press 
or the SET button to launch the Date & Time screen.
3.Press 
or 
tto change the value of the highlighted field. Press 
or 
to highlight another field.
4.After adjusting the settings, press the SET or the MENU button to apply the setting.
Note:
•If you hold down 
or 
, you can change the value quickly.
•If the batteries are removed for about two days, the Date & Time setting will be lost. In this case, make these settings again.
6