AudioSource Amp Six, Modular Dual Channel Amplifiers owner manual Safety Instructions

Page 2

Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

Caution: To reduce the risk of electric shock, do not remove cover (or back); no user serviceable parts inside. Refer servicing to qualified service personnel.

Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

Attention: Pour eviter les chocs electriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Read Instructions

All the safety and operating instructions should be read before the appliance is operated.

Retain Instructions

The safety and operating instructions should be adhered to.

Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed on or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

Heed Warnings

Cleaning

The unit should be cleaned only as recommended by the manufacturer.

All warnings on the appliance and in the operating instructions should be adhered to.

 

Follow Instructions

Power Lines

 

All operating and use instructions should be followed.

An outdoor antenna should be located away from power lines.

Water and Moisture

The appliance should not be used near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.

Non-Use Periods

The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

Ventilation

The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in situation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

Heat

The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

Object and Liquid Entry

Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

Damage Requiring Service

The appliance should be serviced by qualified service personnel when: a) The power supply cord or the plug has been damaged; b) Objects have fallen, or liquid has been spilled into the appliance; c) The appliance has been exposed to rain; d) The appliance does not appear to operate normally or exhibits a marked change in performance; or e) The appliance has been dropped, or the enclosure damaged.

Power Sources

The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

Servicing

The user should not attempt to service the appliance beyond that described in the operat- ing instructions. All other servicing should be referred to qualified service personnel.

Grounding or Polarization

Precautions should be taken so that the grounding or polarization means of an appliance is not defeated.

Product Servicing

In the event your Amp Six fails to operated properly, please contact the dealer where you purchased the unit. Or you may contact AudioSource directly for further assistance.

This manual provides detailed instructions for setting up your equipment. We also offer friendly, toll-free assistance.

1.800.HELP.115

Note: If any part of this product is damaged or missing, do not contact your AudioSource dealer. Please call us directly at 800-435-7115.

Amp Six Specifications

. . . . . . . . .Power Output . . . .

Amp 6.2: 100 watts @ 8Ω

. . . . . .Input Sensitivity

. . . . . . . . . . . . . . . . . . . . .1 volt

 

150 watts @ 4Ω

Input Impedance

. . . . .XLR: 20K Ω ; RCA: 10K Ω

 

Amp 6.3: 150 watts @ 8Ω

Inputs

. . . . . . . . . . . . . . . .Line (RCA)

 

200 watts @ 4Ω

Outputs

. . . . . . .Speaker (Binding Post)

Total Harmonic Distortion (20 Hz to 20KHz)

<0.1%

Dimensions

Amp 6.2: 5.5" x 4.125" x 11.75"

Frequency Response

.20 Hz to 20K Hz, ±1 dB

 

Amp 6.3: 5.5" x 5.5" x 11.75"

Signal to Noise Ratio

.95 dB

 

 

 

 

 

 

 

Design and specifications are subject to change without notice.

9300 North Decatur

 

Portland, OR, 97203

 

Tel. 503.286.9300

 

Fax 503.978.3302

 

audiosource@Phoenixgold.com

 

www.audiosource.net

© 2000 AudioSource, Inc.

Image 2
Contents Back Panel Controls Using The ControlsBasic Guidelines Hooking It UpSafety Instructions

Amp Six, Modular Dual Channel Amplifiers specifications

The AudioSource Modular Dual Channel Amplifier, specifically the Amp Six, stands out in the world of audio amplification, offering both power and flexibility for audiophiles and home theater enthusiasts alike. This amplifier is designed to deliver crystal-clear sound while being adaptable enough to fit various setups, whether for home entertainment or professional audio systems.

One of the key features of the Amp Six is its dual-channel configuration, which allows it to drive two speakers simultaneously with ease. Each channel is capable of delivering an impressive amount of power, ensuring that even the most demanding audio tracks are handled without distortion. This makes it ideal for larger rooms where sound quality and volume are critical.

The Amp Six incorporates advanced technologies that enhance audio performance. With high-efficiency Class D amplifier technology, it not only maximizes power output but also minimizes energy consumption. This design results in less heat generation, allowing the amplifier to run cooler and prolonging its lifespan. Additionally, the built-in thermal and short-circuit protection safeguards the amp and connected speakers.

Connectivity options are another highlight of the AudioSource Amp Six. It features multiple input options, including RCA and balanced XLR inputs, which cater to a wide range of audio sources, from music players to professional recording equipment. The amplifiers also come with speaker outputs that ensure compatibility with various speaker types and impedances, adding to their versatility.

Another noteworthy characteristic is the onboard adjustable gain control. This feature allows users to fine-tune the output level of the amplifier for optimal performance, ensuring that it can be perfectly matched to the specific requirements of the connected speakers. This level of customization not only enhances the listening experience but also helps to prevent damage to equipment by avoiding overpowering scenarios.

The design of the Amp Six is both sleek and practical, allowing it to blend seamlessly into any audio setup. The durable build quality ensures that it withstands the rigors of regular use while maintaining a professional aesthetic.

In summary, the AudioSource Modular Dual Channel Amplifier, Amp Six, combines power, efficiency, and versatility into one remarkable device. With its advanced Class D technology, multiple connectivity options, adjustable gain control, and robust design, it serves as an excellent choice for anyone seeking to elevate their audio experience to new heights. Whether you are setting up a home theater system or enhancing a professional sound setup, the Amp Six is poised to deliver remarkable performance and reliability.