AudioSource Modular Dual Channel Amplifiers, Amp Six instruction

Owner’s Manual

Amp Six

EQ 25.1

Modular Dual Channel Amplifiers

Basic Guidelines

The Amp 6.2 and 6.3 are dual channel power amplifiers. These amplifier uses Tripath’s Class T technology, which combines the efficiency of digital with the sound quality of analog. The power amplifier is the engine of the audio system, supplying clean power to your speakers. This manual applies to both the Amp 6.2 and 6.3, as they differ only in size and output.

Using The Controls

1Power

Press this switch to turn the unit on or off. The red LED will light when the power is on.

2Volume

Turn this control clockwise to increase the volume level. Be careful not to set the volume so high as to cause distortion, which could damage the speakers.

3Low Cut Control

This button may be used to filter out the lowest frequencies. This feature is useful when the speakers driven by the Amp Six are small and/or when your system has a powered subwoofer to reproduce the low bass signal.

4Balance

Turn this knob clockwise or counterclockwise to change the proportion of the signal output to either channel. The 12:00 position indicates equal output to each channel.

5Monitor Jack

This quarter-inch headphone jack allows you to monitor the signal being fed to the speakers.

6Signal LED

This light indicates that a signal is present at one of the inputs.

7Protect LED

This light indicates the unit is overheated, or a shorted load or DC is detected in the amplifier output. When this is severe, the amp will shut off. Turn the power switch off and on to reset.

Peak LED

Amp 6.2

Dual Channel Amplifier

Signal Protect Peak

Volume

Low Cut

Out In

Balance

PowerMonitor

This light indicates when the unit is near clipping. Occasional blinking is normal, but if it remains lit for more than a few seconds at a time, either turn down the level control of the Amp Six or reduce the output level of the component feeding the Amp Six. This will avoid audible distortion.

Back Panel Controls

1 Auto-On Switch

With this switch set to Auto and the front panel power switch on, the auto-on feature is engaged. The Amp Six will automatically turn on when it senses audio signal and will turn off after you have stopped using it. Setting this switch at Manual overrides the auto-on.

2 Bridging Switch

Setting this switch at On (Mono) bridges the stereo channels. This reduces the Amp Six to a single, but more powerful, channel. When bridging, use only the Channel 2 input and the positive speaker outputs.

3Voltage Selector Switch

The setting on this switch depends on the country in which you live. In general, North America is 115 VAC. Check the voltage in your country.

Hooking It Up

When connecting the Amp Six, turn off or unplug your components. This prevents loud “pops” that might damage your speakers while you connect the cables.

The diagram above shows the Amp 6.2 in conjunction with other components from AudioSource’s modular separates line. The equalizer and preamplifier are optional. You also can substitute any amplifier and/or equalizer; the setup is the same.

1.Connect the source component (e.g. DVD player, CD player, cassette deck, microphone) to the preamplifier input.

2.If you are using a graphic equalizer, connect the two output channels of the preamplifier to the equalizer inputs. Connect the Channel 1 and 2 outputs from the equalizer to the Amp Six inputs. If you are not using a graphic equalizer, connect the preamplifier outputs to the Amp Six inputs.

3.Connect the Amp Six speaker outputs to the inputs on your speakers.

Amp Six, Modular Dual Channel Amplifiers specifications

The AudioSource Modular Dual Channel Amplifier, specifically the Amp Six, stands out in the world of audio amplification, offering both power and flexibility for audiophiles and home theater enthusiasts alike. This amplifier is designed to deliver crystal-clear sound while being adaptable enough to fit various setups, whether for home entertainment or professional audio systems.

One of the key features of the Amp Six is its dual-channel configuration, which allows it to drive two speakers simultaneously with ease. Each channel is capable of delivering an impressive amount of power, ensuring that even the most demanding audio tracks are handled without distortion. This makes it ideal for larger rooms where sound quality and volume are critical.

The Amp Six incorporates advanced technologies that enhance audio performance. With high-efficiency Class D amplifier technology, it not only maximizes power output but also minimizes energy consumption. This design results in less heat generation, allowing the amplifier to run cooler and prolonging its lifespan. Additionally, the built-in thermal and short-circuit protection safeguards the amp and connected speakers.

Connectivity options are another highlight of the AudioSource Amp Six. It features multiple input options, including RCA and balanced XLR inputs, which cater to a wide range of audio sources, from music players to professional recording equipment. The amplifiers also come with speaker outputs that ensure compatibility with various speaker types and impedances, adding to their versatility.

Another noteworthy characteristic is the onboard adjustable gain control. This feature allows users to fine-tune the output level of the amplifier for optimal performance, ensuring that it can be perfectly matched to the specific requirements of the connected speakers. This level of customization not only enhances the listening experience but also helps to prevent damage to equipment by avoiding overpowering scenarios.

The design of the Amp Six is both sleek and practical, allowing it to blend seamlessly into any audio setup. The durable build quality ensures that it withstands the rigors of regular use while maintaining a professional aesthetic.

In summary, the AudioSource Modular Dual Channel Amplifier, Amp Six, combines power, efficiency, and versatility into one remarkable device. With its advanced Class D technology, multiple connectivity options, adjustable gain control, and robust design, it serves as an excellent choice for anyone seeking to elevate their audio experience to new heights. Whether you are setting up a home theater system or enhancing a professional sound setup, the Amp Six is poised to deliver remarkable performance and reliability.