Introduction
Philips digital PhotoFrame can be placed either vertically or horizontally to fit the photos on display.You can place it somewhere in a room for a continuous display by connecting it to the mains power supply.
1.Important
ENGLISH
1.1Safety precautions and maintenance
Read and follow these instructions when connecting and using your PhotoFrame:
•To protect your display from possible damage, do not put excessive pressure on the LCD panel.When moving your PhotoFrame, grasp the frame to lift; do not lift the it by placing your hand or fingers on the LCD panel.
•Unplug the PhotoFrame if you are not going to use it for an extensive period of time.
•Unplug the PhotoFrame if you need to clean it with a slightly damp cloth.The screen may be wiped with a dry cloth when the power is off. However, never use alcohol, solvents or
•Consult a service technician if the PhotoFrame does not operate normally when you have followed the instructions in this manual.
•The casing cover should be opened only by qualified service personnel.
•Keep the PhotoFrame out of direct sunlight and away from stoves or any other heat source.
•Keep the PhotoFrame dry.To avoid electric shock, do not expose it to rain or excessive moisture.
Important
•When positioning the PhotoFrame, make sure the power plug and outlet are easily accessible.
•To avoid the risk of shock or permanent damage to the set, do not expose the PhotoFrame to rain or excessive moisture.
1.2Care of the PhotoFrame
1Do not drop
PhotoFrame is a complicated electronic device and cannot withstand shock from being dropped.
2Do not expose to moisture PhotoFrame is neither moisture proof nor moisture resistant. Exposing it to moisture or liquid of any kind will very likely damage your PhotoFrame.
3Do not hit or scratch
The LCD panel of PhotoFrame is made of glass and is therefore sensitive to abnormal force and sharp edges.