2.2Control Buttons and Menu Navigation
•Use your PhotoFrame by pressing the control buttons in the back.
•The control buttons and instructions are shown at the bottom of the menu screen.
Use the navigation controller to move between the menus. Move it left and right to cycle through the menu tree.
2.3Connections
2.3.1Memory Card
Photo display (underside)
A. CF Card
B. SD/ MMC /MS / xD Card
Inserting a memory card:
•Insert the memory card into the slot in the frame.
•For xD, SD, MMC, MMC+, or Memory Stick cards slide the card until it locks in place.
•Push the USB drive in the slot.
•After a few seconds, photos on the memory card will display and a slideshow will start.
DO NOT remove the memory card immediately after inserting it in to the PhotoFrame or when PhotoFrame is counting the Photos.Wait until the screen is stable
Removing a memory card:
•To remove the xD, xD, SD, MMC, or Memory Stick card, push the card again to unlock and then pull out the card.
Note:
To be able to delete photos from the memory card it must NOT be locked.To unlock the card follow the manufacturer’s instructions.
2.3.2 USB Connections
For Windows PC (XP & Vista):
• | Connect PhotoFrame to a PC via the supplied |
| USB cable where it will be recognized as a |
| mass storage device. |
Your PhotoFrame |