Q-See QSTD501616C quick start Enjoy, Setting up the DVR to Backup Files, By Email

DSetting up the DVR to Backup Files

NOTE: If you stop recording while backing up the files, the backup will go faster.

Insert a USB flash drive into the USB port located on the front of the DVR. Press the BACKUP button and enter the User Id and Password if the system is password protected. This will display the BACKUP screen shown in (D1). Select the Date icon and push ENTER. Select the date of files to backup. The days with files will be high- lighted. Select the START TIME and END TIME and push the BACKUP button. This will display the BACKUP INFO screen (D2). This screen will show the START and END time, the device, the space required, and how much space is available. Select OK, and the backup will start. A progress bar will display (D3). Once the backup is complete, a dialog box will display.

D1

D2

D3

3Enjoy

CONGRATULATIONS

on your purchase!

This Q-See product has undergone extensive quality control. If you have any issues during the setup process, please contact our support department before returning the product.

We have your solution!

1)Need assistance setting up the remote monitoring feature with your Q-See DVR? Visit www.portforward.com/qsee

2)Visit our Q-See Support Section at www. Q-See.com for instant troubleshooting tips, FAQs, DVR firmware downloads, Live Chat and More.

3)Contact our Support Team:

On the Web: (24/7) Visit the Technical Support Section

www.Q-See.com

By Phone (Monday thru Friday, 9am-5pm (PST)

Tech Support 1 (877) 998 3440, ext 539

Customer Service 1 (877) 998 3440 ext. 538

@	By Email:
	ts@dpsi-usa.com

Page 9 Page 10