2Setup
To navigate through the DVR menu, three options are available:
1.DVR Front Panel: Use the DIRECTION keys to move the cursor and the ENTER key to select
2.Remote Control
3.USB Mouse (included)
AAccessing the DVR menus
A1 | Press the MENU key on the DVR front |
| |
| panel, which will display the LOGIN |
| SCREEN (A1). Enter the default user |
| name: admin, and password: 123456.This |
| will display the SYSTEM SCREEN (A2). |
| Use the direction keys to move the cursor |
| and the ENTER key to select. |
A2 | The system screen offers the following | |
|
| |
|
| setup features: |
|
| |
|
|
|
BASIC option: set time, date, enable audio and password check.
LIVE option: adjust the camera images
RECORD option: (B2) to set up resolution, frame rate, video quality and enable cameras for recording.
PTZ option: setup
USER option: setup users on the system
NETWORK option: setup remote access
TOOLS option: to access hard drive information, update firmware, and restore system defaults.
Refer to Chapter 3 of the user’s manual for more information on the SYSTEM menu.
BSetting up the DVR to Record: This system offers four modes for recording: 1) Manual, 2) Schedule, 3) Motion Detection, and 4) External Sensor.
For setup of external sensor alarms refer to sections 2.3.2 and 3.3.5 of the user’s manual.
B1 |
|
|
| B2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Manual Recording:
Setup and enable the cameras you want to record by going to the System Menu and selecting the RECORD option (B1, Red Box) this will display the Record Screen (B2). Put check marks in the cameras you want to record, and set the quality and frame rate you prefer for each camera. Push the RECORD button on DVR to start recording. Push the stop button to stop recording.
B3 |
| B4 |
|
|
|
|
|
|
Time Schedule Recording:
Go to the System Menu and select the SCHEDULE option (B3, Red Box). The SCHEDULE screen (B4) will appear. Put a check mark in the Schedule box (B4, Red Box). Select or
Motion Detection Recording:
You must first setup the days and times for recording on motion detection, by going to the System Menu and selecting the SCHEDULE option (B3, Red Box). The Green area shows the hours that are enabled to record, and the transparent area shows the hours which are not enabled to record. Select the hours you wish to record. Put a check mark in the Motion Box (B4, Green Box).
Page 5 | Page 6 |