
2
Using the System Setup Program
Start Menu
The system employs the latest AMI CMOS BIOS, which is stored in Flash memory. The Flash memory supports the Plug and Play specification, and contains a System Setup program, the Power On Self Test (POST) routine, and the PCI
This system board supports system BIOS shadowing, enabling the BIOS to execute from
This Setup utility should be executed under the following conditions:
•When changing the system configuration, configure for items such as:
–Hard drives, diskette drives, and peripherals.
–Password protection from unauthorized use.
–Power management features.
•When a configuration error is detected by the system and you are prompted to make changes to the Setup utility.
•When redefining the communication ports to prevent any conflicts.
•When changing the password or making other changes to the security setup.
NOTE: Only items in brackets [ ] can be modified. Items that are not in brackets are display only.
System Setup Options at Boot
<F2> | Initiate Setup during POST |
|
|
<F9> | Load optimal (for example, CMOS) defaults |
|
|
<F10> | Save settings and exit in BIOS Setup |
|
|
26 Using the System Setup Program