Dell C6145 manual Removing and Installing the Mid-plane Holder

12Remove the screws that secure the mid-plane holder to the chassis. Figure 3-29.

13Lift the mid-plane holder out of the chassis. See Figure 3-29.

Figure 3-29. Removing and Installing the Mid-plane Holder

1 screw (6) 2 mid-plane holder

14Remove the screws that secure the lower middle plane to the chassis. Figure 3-30.

15Disconnect all the cables from the lower middle plane.

Note the routing of the cable underneath the tabs on the chassis as you remove them from the system. You must route these cables properly when you replace them to prevent the cables from being pinched or crimped.

16Lift the lower middle plane out of the chassis. See Figure 3-30.

128 Installing System Components