Token | Setup Option | Description |
|
| |
|
|
| |||
|
| The BIOS console redirection, if | |||
401C | Redirection After BIOS POST | enabled, continues to operate after the | |||
|
| OS boot |
|
| |
|
| The BIOS console redirection, if | |||
|
| enabled, operates during the BIOS boot | |||
401D | Redirection After BIOS POST | only and is disabled prior to OS boot | |||
|
| ||||
|
| D7h, 401Ah and 401Bh. |
|
| |
|
| Whenever the system boots from BIOS, | |||
|
| the first | |||
|
| as the first device in the boot sequence. | |||
|
| Enabling this feature causes the BIOS | |||
|
| operation to occur on the next and all | |||
|
| subsequent boots and causes a change in | |||
4022 | Force PXE First | the system’s defined | boot | sequence | |
(unlike tokens 93h and 94h). The BIOS | |||||
|
| ||||
|
| chooses the first | |||
|
| the system’s onboard network controller, | |||
|
| if present and enabled, or the first | |||
|
| bootable network device found in the | |||
|
| system’s standard PCI search order — | |||
|
| whichever comes first. |
|
| |
4023 | Force PXE First | Disable the PXE boot override and the | |||
system boot sequence is in effect. | |||||
|
| ||||
4031 | Quick Boot | Enabled, skip the system memory tests. | |||
|
|
|
|
| |
4032 | Quick Boot | Disabled, execute the | system | memory | |
tests. |
|
| |||
|
|
|
| ||
4033 | Serial Port Mode | Console Redirection baud rate will be set | |||
to 115,200 bits per second. |
| ||||
|
|
| |||
4034 | Serial Port Mode | Console Redirection baud rate will be set | |||
to 57,600 bits per second. |
| ||||
|
|
| |||
4035 | Serial Port Mode | Console Redirection baud rate will be set | |||
to 19,200 bits per second. |
| ||||
|
|
| |||
4036 | Serial Port Mode | Console Redirection baud rate will be set | |||
to 9,600 bits per second. |
|
| |||
|
|
|
| ||
4816 | Force PXE BOOT Only | Disable Force PXE Boot only. |
| ||
|
|
|
| ||
4817 | Force PXE BOOT Only | Enable Force PXE Boot only. |
| ||
|
|
|
|
| |
