Dell C6145 manual Installing the 10GbE Mezzanine Card

Installing the 10GbE Mezzanine Card

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Put the two ports of the 10GbE mezzanine card through the two slots of the bracket. See Figure 3-16.

2Install the three screws to secure the 10GbE mezzanine card to the bracket. See Figure 3-16.

3Install the 10GbE mezzanine-card assembly to the mezzanine-card bridge board on the system-board assembly. See Figure 3-15.

4Install the three screws to secure the 10GbE mezzanine-card assembly to the system-board assembly. See Figure 3-15.

5Reconnect all the cables to the 10GbE mezzanine card.

6Replace the system-board assembly. See "Installing a System-Board Assembly" on page 88.

7Reconnect the system to its electrical outlet and turn on the system, including any attached peripherals.

Installing System Components 105