6Remove the three screws that secure the SAS mezzanine card to the bracket. See Figure 3-14.

7Remove SAS mezzanine card away from the bracket. See Figure 3-14.

Figure 3-14. Removing and Installing the SAS Mezzanine Card

1

screw (3)

2

SAS mezzanine card

3

SAS mezzanine-card bracket

 

 

Installing the SAS Mezzanine Card

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Align the SAS mezzanine card to the bracket by the three screw holes. See Figure 3-14.

2Replace the three screws to that secure the SAS mezzanine card to the bracket. See Figure 3-14.

3Install the SAS mezzanine-card assembly to the mezzanine-card bridge board on the system-board assembly. See Figure 3-13.

102 Installing System Components

Page 102
Image 102
Dell C6145 manual Removing and Installing the SAS Mezzanine Card