Dell C6145 manual Removing the Mezzanine-Card Bridge Board

Mezzanine-Card Bridge Board

Removing the Mezzanine-Card Bridge Board

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Turn off the system, including any attached peripherals, and disconnect the system from its electrical outlet.

2Remove the system-board assembly. See "Removing a System-Board Assembly" on page 87.

3Remove the mezzanine card. See “Removing the SAS Mezzanine Card” on page 101 and “Removing the 10GbE Mezzanine Card” on page 103.

4Pull the mezzanine-card bridge board away from the mezzanine slot on

the system board. See Figure 3-17.

Figure 3-17. Removing and Installing the Mezzanine-Card Bridge Board

1 mezzanine slot 2 mezzanine-card bridge board

106 Installing System Components