4Place the upper middle plane holder into the chassis. See Figure
5Replace the screws that secure the middle plane holder to the chassis. See Figure
6Place the middle plane holder support into the chassis. See Figure
7Replace the screws that secure the middle plane holder support to the chassis. See Figure
8Place the upper middle plane on the middle plane holder. Make sure that the two
9Replace the screws that secure the upper middle plane to the middle plane holder. See Figure
10Connect all the cables to the upper middle plane.
You must route these cables properly through the tabs on the chassis to prevent them from being pinched or crimped.
11Place the
12Replace the screws that secure the
13Replace the cooling fans. See "Installing a Cooling Fan" on page 120.
14Replace the
15Close the system, see "Closing the System" on page 118.
16Reconnect the system to its electrical outlet and turn on the system, including any attached peripherals.