Dell C6145 manual Installing the Expansion-Card Connector

Figure 3-12. Removing and Installing the Expansion-Card Connector

1	screw (2)	2	expansion-card bracket
3	expansion-card connector

Installing the Expansion-Card Connector

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Place the expansion-card connector into the expansion-card bracket. See Figure 3-12.

2Replace the two screws securing the expansion-card connector to the expansion-card bracket. See Figure 3-12.

3Install expansion card. See “Installing the Expansion Card” on page 97.

4Replace the system-board assembly. See "Installing a System-Board Assembly" on page 88.

5Reconnect the system to its electrical outlet and turn on the system, including any attached peripherals.

100 Installing System Components