STEP 6. If there is only one router detected, then you may skip to Section 3: Simple Port Forwarding.
If Multiple Routers are Detected
If there are multiple routers, you will see a display similar to Picture 12.
If so, it may be preferable to connect your DVR and computer to the router that connects directly to the Internet. However, this is not always possible depending upon your particular situation.
PICTURE 12
In this case, you will need to proceed with the next section using the IP address for Router 1 to forward its ports. After that, you will need to proceed to Section 4.
SECTION 2: DOWNLOAD SIMPLE PORT FORWARDING PROGRAM
Download the FREE Simple Port Forwarding program from:
http://www.simpleportforwarding.com/download
Click on Download on Mirror 7 to download and install this program.
PICTURE 13
Once the program is installed, go to the Windows Start Menu (Windows icon in the lower left of your monitor) and look for Simple Port Forwarding in the program list. Click on the program to launch it.
PICTURE 14
Once Simple Port Forwarding has launched, select your router from the list. The default Router IP and Login information will automatically come up. If you have previously changed the login information, then you will have to enter it manually
PICTURE 15
Click on “+” at the bottom to open the window allowing you to set your ports.