Basic Operations
Press this button ( 
) to switch 2D/3D mode. Also, the image showing on the LCD screen will become 2D/3D. Pressing this button in playback can change the 2D or 3D files store in your camera or memory card. Please note that 3D files cannot be recorded/viewed/deleted in 2D mode, and vice versa. The 2D/3D files are stored separately.
When recording or shooting in 2D mode, only the right lens is activated.
This product utilizes the “Parallax Barrier” 3D technology. The parallax barrier is a special layer placed in front of the LCD screen. In 3D mode, it allows each of your eye to see a different set of pixels on the screen (hence the 3D effect). The brightness of the screen seems to be halved in 3D mode.
Taking a photo
1.Move the Joystick up/down ( 
) to zoom in/out the image until a proper scene is set.
2.Press the Shutter button ( 
) to take a photo.
To avoid fuzzy photos, please hold the camera steady or use a tripod.
In order to optimize the 3D effect, the ideal shooting range is 1m~4m (3ft~13ft), and you are advised to take pictures with sufficient light.
Recording a video clip
1.Press the Record button ( 
) to start the recording.
2.During recording, you can move the
Joystick up/down ( 
) to zoom in/out
. You can also press OK to pause or resume the recording.
3.Press the Record button ( 
) again to stop the recording.
When recording in a dark environment, please use extra light source to illuminate the subject.
4