USING THE SUBWOOFER (SW-P130)
Controls and their functions
SUBWOOFER SYSTEM YST SW005
1
Port
POWER
ON
2
OFF
3
VOLTAGE
Front panel
Rear panel
VOLUME | |
0 | 10 |
AUTO |
|
STANDBY |
|
HIGH |
|
LOW |
|
OFF |
|
INPUT | /MONO |
POWER | |
ON |
|
OFF |
|
VOLUME
6
0 10
AUTO
STANDBY
4HIGH LOW
OFF
5 | INPUT | /MONO |
|
SELECTOR
|
| VOLTAGE | |
|
| SELECTOR | |
| |||
|
|
| |
|
|
|
|
1Power indicator
Lights up GREEN when the POWER switch (2) is pressed in to the ON position and goes off when set to the OFF position.
*Standby mode
If the POWER switch (2) is pressed in to the ON position and the AUTO STANDBY switch (4) is set
to the HIGH or LOW position, this indicator lights up RED when no signal is received by the subwoofer.
2POWER switch
Press this switch to the ON position to turn on the
power of the subwoofer. When the power of the subwoofer is on, the power indicator (1) on the front panel lights up GREEN. Press this switch again to set to the OFF position to turn off the power of the subwoofer.
3VOLTAGE SELECTOR switch
(For China, Korean and General models)
If the preset setting of the switch is incorrect, set the switch to the proper voltage range
Consult your dealer if you are unsure of the correct setting.
WARNING
Be sure to unplug the subwoofer before setting the VOLTAGE SELECTOR switch correctly.
4AUTO STANDBY (HIGH/LOW/OFF) switch
This switch is originally set to the OFF position. By setting this switch to the HIGH or LOW position, the subwoofer’s automatic
*Make sure to change the setting of this switch only when the POWER switch (2) is in the OFF position.
5INPUT terminals
Used to input line level signals from the amplifier.
6VOLUME control
Adjusts the volume level. Turn the control clockwise to increase the volume, and counterclockwise to decrease the volume.