ViewSonic VT3745-NT, VS12078, VT4245-NT, VT3245-NT quick start Other Information, Troubleshooting

Page 31

Other Information

Troubleshooting

No power

Make sure the Display and the power cord are connected correctly.

Check if you pressed POWER on the remote control unit. If the indicator in the front panel is red, press POWER in the remote control or the front control panel.

No picture

Connect to local CATV system equipment, and make sure the signal is unlocked.

Make sure the Display and the Audio/Video signal input devices are connected correctly.

In PC (VGA) mode, the screen turns off automatically 2 minutes after no signal input detected. In the other modes, the screen turns off automatically 15 minutes after no signal input detected.

Strange color, light color, or color misalignment

Is the room too bright? The picture may look dark in a room that is too bright.

Check the input signal setting.

No sound

Make sure the Mute function is not operated.

When signal passed by the HDMI distribution amplifier, that may result in this situation.

Remote control unit does not operate

Check if the batteries are inserted with the polarity(+,-)correctly aligned.

Check if the batteries are discharged. Please replace with new batteries.

Make sure that you do not use the remote control under strong or fluorescent lighting.

Check if there is a fluorescent light illuminated near the remote control sensor.

The path of the remote control beam may be blocked; please make sure the path is clear and that remote control is aimed at the remote control sensor in the Display.

Power is cut off suddenly

Check if the off timer or sleep timer are set.

The unit’s internal temperature has increased. Remove any objects blocking the vents and clean them to remove dust.

Picture is cut off /with side bar screen

Check if the image position is correct.

Check if the screen mode adjustments such as picture size are made correctly.

LCD Display does not operate

External influences such as lightning or static electricity may cause improper operation. In this case, operate the unit after first turning on the power, or plugging the AC cord and plugging it in again after 1 to 2 minutes.

ENGLISH

ViewSonic

29

VT3245-NT/VT3745-NT/VT4245-NT

Image 31 Contents
User Guide Model No. VT3245-NT / VT3745-NT / VT4245-NT ViewSonicViewSonicContents Important Safety Instructions Following information is only for EU-member states Declaration of RoHS ComplianceProduct Registration Copyright InformationProduct disposal at end of product life Cleaning the LCD Display Antenna Installation InstructionsDisclaimer Product components Overview of the LCD DisplayFront view Function Rear view 32/42-inchComponent Source Hotkeys Remote Control17 確認 Connecting power Inserting the remote control batteriesGetting started Supported Resolutions PC ConnectorCable Connections 32/42-inch Inch Other ConnectionsCompatibility table of Video Basic Operation Display Sound ModeDCR OFF Using the OSD MenuPress tu or +/- key to select User, Standard Picture AdjustmentVivid, or Soft DCR Trol to view OSD menu Sound AdjustmentPress tu key to select Sound Mode Press 選單 key on the control panel or the remote conAuto Volume Press pq key to select CATV/AIR TV Tuner AdjustmentDTV OSD Functions Dtvchannel Auto Search Channel Edit Signal StrengthPress u key to enter the Channel edit submenu DTV Channel Management DTV Functions Press pq key to select Auto Adjust PC SetupPress pq key to select Reset Setup AdjustmentSupported File Formats Using a USB SourceProgram Guide Other Information TroubleshootingYou will need the product serial number Customer SupportViewsonic LCD Display Limited Warranty