ENGLISH
14.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the unit. When a cart is used, use caution when moving the cart/unit combination to avoid injury from tipping over.
15.Unplug this unit when unused for long periods of time.
16.Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way, such as: if the
17.Operating temperature: 0~40°C.
Following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
If the batteries, accumulators and button cells included with this equipment, display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of
more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the Eu-
ropean Parliament and the Council on restriction of the use of certain hazardous substances in electrical
and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:
Substance | Proposed Maximum | Actual Concentration | |
Concentration | |||
|
| ||
|
|
| |
Lead (Pb) | 0.1% | < 0.1% | |
|
|
| |
Mercury (Hg) | 0.1% | < 0.1% | |
|
|
| |
Cadmium (Cd) | 0.01% | < 0.01% | |
|
|
| |
Hexavalent Chromium (Cr6+) | 0.1% | < 0.1% | |
Polybrominated biphenyls (PBB) | 0.1% | < 0.1% | |
|
|
| |
Polybrominated diphenyl ethers (PBDE) | 0.1% | < 0.1% | |
|
|
|
Certain components of products as stated above are exempted under the Annex of the RoHS Directives
as noted below:
Examples of exempted components are:
1.Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive.
2.Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic parts (e.g. piezoelectronic devices).
3.Lead in high temperature type solders (i.e.
4.Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.
The “HD ready” Logo is a trademark of EICTA.
ViewSonic |