Philips LTC0600 installation manual Mounting the camera, Operating controls and features

Page 8

7.3 VIDEO CONNECTIONS

 

BNC composite video

 

Sync. Input

 

 

 

 

 

Video output

Video output

 

 

Y/C 4 pin connector or

 

 

 

 

 

 

 

1

 

 

 

 

 

2

 

 

 

 

 

 

 

 

Balanced 4 pin connector

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(selectable via PC software)

 

 

 

 

 

 

 

3

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

+

 

 

 

 

 

 

 

 

 

 

 

7.4 SYNCHRONIZATION

 

 

 

 

 

 

 

 

 

 

 

 

 

H-V LOCK

 

 

 

Y/C OUT/ Balanced

CVBS OUT

 

 

CONNECTION (SYNC)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The vertical and horizontal camera

 

 

RS232 4

 

 

 

 

synchronization signals can be generated:

 

 

Ground

N. C. Rx Tx

Mode switch

 

 

 

 

internal x-tal;

 

 

 

 

 

 

by the mains supply or the AC low

5

4

3

 

2

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

voltage supply (50/60 Hz);

9

 

8

 

7

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

by a video signal from an external

 

 

C.

C.

C.

C.

 

 

 

 

 

 

 

 

 

N.

N.

N.

N.

 

 

 

 

 

source (PAL/NTSC), sync input

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BNC ;

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

by a synchronization signal from an external source, sync input BNC .

 

 

 

 

The camera automatically configures for the applied external synchronisation. For adjustment see chapter 9.

7.5 REMOTE CONTROL CONNECTION (RS-232)

The camera can be set up using an optional Windows based PC software tool. This product can be ordered separately.

Functions available with this software tool are:AGC manual,Automatic. Electronic Light Control (ELC). Dynamic Contrast. Gamma/Compression/Contour, OSD remainder text, Camera set-up logbook etc.

RS-232 communication: Pin 3

= Rx, Pin 2 = Tx, Pin 5 = GND

pin 4,6,8,9 are not connected .

 

Hard wire mode switch between current mode and mode 3 Connect Pin 1 to pin 5 (GND) by a switch. (refer to chapter 9.2.1)

Input pin 1: 10kΩ to +5V. Default active Low. Selection Active High or Disable via PC configuration tool.

RS-232 Connector functions

Camera system remote control.

Mode selection

Advanced Camera set-up via PC based Configuration tool LTC 0650/00.

The windows based configuration is a separate Philips product which is not included with the camera itself. Functions available with this software tool are: Mode set-up and PC logging. AGC manual, Boost,Automatic. Electronic Light control (ELC). Dynamic Contrast. Gamma/Compression/Contour/Black level. Input/output functions and impedance selections.

12

8

Mounting the camera

English

 

Top mounting:

1/4” 20 UNC

 

Max lens weight:

0.5 kg

Digital Colour Camera

Bottom mounting:

1/4” 20 UNC

Max. lens weight:

1.5 kg

9

Operating controls and features

9.1 HOW TO SET UP YOUR CAMERA

 

 

The camera has 8 buttons which can be operated from the side of the camera. Feedback is

 

provided by means of On Screen Display. Extended setup functions are possible via the

 

software configuration tool.

 

Mode

=

Mode selection

 

LVL

= Video Level

 

BLC

=

Back Light Compensation

 

AWB

= Auto White Balance

 

LL

=

Linelock

 

Phase

=

Linelock-phase, H-phase or Vext phase

+= Increase or On

- = Decrease or Off

After pressing a function button, the – or + buttons operate on the selected function:

: Decrease or Off + : Increase or On

These functions automatically increase when the button is depressed for a longer period. For all functions the - and + actions are positive choices.There are no toggle functions and no cycles.

13

Image 8
Contents Digital Color Camera Subject to changes without notice. Philips I&C 3122 165Contents Important Safeguards FCC StatementEnglish Features PrecautionsIntroduction PreparationLens Adjustments Mounting the lensBack focus adjustment AC Mains Power SupplyElectrical Connections LOW Voltage AC/DC Input TerminalOperating controls and features Mounting the cameraFunction SET-UP AGC SpecificationsMTF Environmental InhaltMechanical