English

9)Ventilation - Openings in the enclosure, if any, are provided for ventilation and to ensure reliable operation of the unit and to protect it from overheating.These openings must not be blocked or covered.This unit should not be placed in a built-in installation unless proper ventilation is provided or the manufacturer’ s instructions have been adhered to.

10)Power Sources - This unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply you plan to use, consult your appliance dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions.

11)Grounding or Polarization - This unit may be equipped with a polarized alternating- current line plug (a plug having one blade wider than the other).This plug will fit into the power outlet only one way.This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Alternately, this unit may be equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin.This plug will only fit into a grounding-type power outlet.This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

12)Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, convenience receptacles, and the point where they exit from the appliance.

13)Power Lines - An outdoor system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outdoor system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. U.S.A. models only - refer to the National Electrical Code Article 820 regarding installation of CATV systems.

14)Overloading - Do not overload outlets and extension cords as this can result in a risk of fire or electric shock.

15)Object and Liquid Entry - Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit.

16)Servicing - Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

17)Damage Requiring Service - Unplug the unit from the outlet and refer servicing to qualified service personnel under the following conditions

a)When the power-supply cord or plug is damaged.

b)If liquid has been spilled, or objects have fallen into the unit.

c)If the unit has been exposed to rain or water.

d)If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation.

e)If the unit has been dropped or the cabinet has been damaged.

f)When the unit exhibits a distinct change in performance this indicates a need for service.

18)Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

19)Safety Check - Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

20)Coax Grounding - If an outside cable system is connected to the unit, be sure the cable system is grounded. U.S.A. models only—Section 810 of the National Electrical Code,ANSI/NFPA No.70-1981, provides information with respect to proper grounding of the mount and supporting structure, grounding of the coax to a discharge unit, size of grounding conductors, location of discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

21)Lightning - For added protection of this unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system.This will prevent damage to the unit due to lightning and power-line surges.

NOTE

•For permanently connected equipment, a readily accessible disconnect device shall be incorporated in the fixed wiring;

•For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.

LTC0500 specifications

The Philips LTC0500 is a modern lighting solution that combines cutting-edge technology with energy efficiency and functionality. Designed for a variety of applications, this LED lighting fixture is particularly suited for both commercial and residential environments. One of its most notable features is its exceptional energy efficiency, which allows users to significantly reduce their energy consumption compared to traditional lighting systems.

At the core of the LTC0500 is its advanced LED technology, which offers a lifespan that greatly exceeds that of conventional bulbs. This translates to lower maintenance costs and fewer replacements, making it an ideal choice for any user looking to minimize operational costs over time. The fixture also provides high luminous efficacy, ensuring maximum brightness while consuming minimal wattage.

The LTC0500 is known for its superior color rendering capability, with a Color Rendering Index (CRI) rating that allows colors to appear more vibrant and true to life. This feature is particularly beneficial in settings where accurate color depiction is crucial, such as retail environments, art galleries, and showrooms. Additionally, the adjustable color temperature options allow users to customize the ambiance of a space, ranging from a warm, inviting glow to a cool, energizing light.

Another significant aspect of the LTC0500 is its sleek, modern design. It is aesthetically pleasing and versatile, capable of blending seamlessly into various architectural styles. The fixture is also available in different forms, such as recessed, surface-mounted, and pendant versions, making it suitable for diverse installation scenarios.

An added advantage of the LTC0500 is its compatibility with smart lighting systems. It can be integrated with existing building management systems, allowing for enhanced control and automation. Users can take advantage of features such as dimming, scheduling, and occupancy sensing, contributing to further energy savings and improved user experience.

The Philips LTC0500 is built to be durable and reliable, constructed from high-quality materials that withstand regular wear and tear. This ensures that the fixture remains in good condition over its long lifespan, providing consistent performance.

In conclusion, the Philips LTC0500 is an exemplary lighting solution that emphasizes energy efficiency, advanced technology, and aesthetic appeal. With its extensive features and capabilities, it meets the demands of both commercial and residential applications, making it a wise investment for anyone seeking to enhance their lighting experience.