5.10 Normal Mode
1.The first time the camera is turned on a “20” will appear in the LCD display.
2.Pressing the Shutter button once and you will hear a short beeping sound, which indicates that a photo has been taken.
3.The number on the LCD display will automatically decrement by one.
4.If the memory is full, the number “00” will be shown in the LCD display. If you keep pressing the Shutter button you will hear a series of beeps indicating the memory is full.
5.20 Self-Timer
1.Press the Mode button until “
” is displayed on the LCD, then press the Shutter button to confirm the mode change.
2.A picture will be taken after a
3.Then the number on the LCD display will automatically decrement by one.
4.Camera will return to normal operation mode.
5.30 Continuous shooting mode
1.Press the Mode button until “
” is displayed on the LCD, then press & hold the Shutter button to begin Continuous mode.
2.Each image taken will decrement the number on the LCD display by one.
2.Continuous shooting stops when you release the Shutter button or when the memory is full (i.e. “00” displayed on the LCD).
5.40Image Resolutions
5.41High Resolution format
1.Press the Mode button until “
” is displayed on the LCD, then press the Shutter button.
2.Using
3.Using Compressed mode while in High Resolution format allows you take a maximum of 60 photos
5.42 Low Resolution format
1.Press the Mode button until “
” is displayed on the LCD, then press the Shutter button.
2.Using
3.Using Compressed mode while in Low Resolution format allows you take a maximum of 243 photos
5.50Compression Modes
5.51 Compressed mode
1.Press the Mode button until “
” (while camera is in
2.Using Compressed mode while in High Resolution format allows you take a maximum of 60 photos (see table below).
3