Then uninstall the driver program named “Camera Driver” under the “Add/ Remove program” from the Windows Control Panel and restart the computer. Reinstall the driver again.
4. After installing the camera software, the camera is not detected by the software:
xSome PC's have been shipped without the USB port mode enabled. To enable the USB Port. You must run the system CMOS setup program. This setup program is only available when you power up the computer. The procedure is different for each system so you will need refer to your PC manual for more details.
Note: If the “Driver Open Fail” error message pops up when you click the MyCam CIF application, please refer to the “Driver Fix” document included in the
5. To Uninstall the Camera Driver and AvailaSoft Software :
xTo uninstall the Camera Driver, go to Control Panel Æ Add/ Remove Programs Æ MyCam CIF Æ Remove.
xTo uninstall the Photo2Album software, go to Windows Start menu
To uninstall camera driver | To uninstall Photo2Album |
Camera Maintenance:
Maintaining your camera will ensure longer life and will minimize the chances of causing damage to your camera and computer.
xKeep the camera away from moisture and extreme temperature.
xClean the outside of the camera with a clean, dry cloth.
xNever use harsh or abrasive cleaners or organic solvents on camera or on any of its parts.
xNever disassemble or touch the inside of the camera.
14