Philips SPC1300NC/00 user manual Auto White Balance, Brightness

Page 14

EN

WebCam settings Chapter

0Auto White Balance

Most light sources are not 100% pure white but have a certain ‘color temperature’. Normally our eyes compensate for lighting conditions with different color temperatures.

If the automatic white balance is selected, the WebCam will look for a reference point which represents white. It will then calculate all other colors based on this white point and compensate the other colors accordingly, just like the human eye.

You can also select fixed settings for ‘Indoor’,‘Outdoor’ and ‘Fluorescence’ conditions or use the ‘Red’ and ‘Blue’ sliders if you would like to set the WebCam according to your personal color temperature preferences.

!Brightness

Brightness enables you to adjust the brightness of the displayed image or video to suit your own preference. Use the slider to find your preferred setting.

@Contrast

Contrast enables you to control the ratio between dark and light according to your own preference.

Use the slider to find your preferred setting.

#Gamma

Gamma enables you to brighten dark areas within the displayed image or video and visualize more details without over-exposing already light areas.

Use the slider to find your preferred setting.

$Saturation

Saturation enables you to set the color reproduction from black and white to a full color image or video according to your own preference.

Use the slider to find your preferred setting.

%Black and white

The 'Black and white' checkbox is used to switch from color images to black and white and back.

^Backlight compensation

Turn on the backlight compensation to improve the image quality when you have a scene where the background has a high illumination level (for instance when you are sitting in front of a bright light).

14

Image 14
Contents SPC1300NC Your WebCam What’s in the box? ENChapter Contentshapter Welcome Chapter Copyright Safety precautionsThings you should know Chapter Installing the WebCam software Select your languageSelect ‘Yes’,then click ‘Finish’ to restart your PC / laptop You can now connect your WebCamConnecting the WebCam to your PC / laptop Flickerless image WebCam settings ChapterGeneral settings Picture enhancement Video settingsDemo mode Auto Exposure Full automatic controlon/offFrame rate Shutter speedAuto White Balance BrightnessAudio settings Features settings ‘Features’ menu,check the ‘Change background’ box Change background£ Add logo Selecting your WebCam Operating the WebCam ChapterVLounge Select ‘Video Device’Capturing images / making video recordings Deleting captured items Click the ‘OK’ button to delete the selected itemsMotion detection Click ‘Start monitoring’ to start monitoringClick ‘ ’ to access the ‘Monitor settings’ menu Click the ‘OK’ button to delete the selected videologsBroadcasting your videos over the Internet Lux 3MP90 fps Voltage requirementsFCC compliance Important information ChapterDisclaimer This device may not cause harmful interference,Environmental information Disclaimer of warrantyImportant information System requirements