Philips SPC900NC/27 manual Connecting the camera to your PC, SPC 900NC PC Camera is XP Plug & Play

Page 9

ENGLISH 9

4Press the 'Ready' button after you have set the audio level and the installation manager will continue to install other components.

>The screen below appears when the installation was successful. You can now connect your PC Camera.

Note!

The SPC 900NC PC Camera is 'XP Plug & Play'.

This means if you are running Windows XP and you have installed Service Pack 2 and the latest Microsoft Windows XP updates you don't need to install the SPC 900NC PC Camera driver. Simply plug in the camera and you can start using your SPC 900NC PC Camera.

Connecting the camera to your PC

1Be sure to run the installation CD first, before connecting the camera to the PC.

2 Turn on the PC.

3 Connect the USB plug of the USB cable to a USB port of the PC.

>The camera will now derive its power from the PC.

4Use the clamp and the two rubber rims to attach the camera to your PC monitor or laptop screen or fold out the clamp and place the camera on your desk.

Image 9
Contents Philips SPC 900NC PC Camera Philips SPC 900NC PC Camera IntroductionThings you should know ContentsCopyright Safety precautionsPack contents Functional overview Installing the camera software InstallationFollowing screen, including a progress bar, appears SPC 900NC PC Camera is XP Plug & Play Connecting the camera to your PCGeneral controls Camera settingsFull automatic control on/off Picture controlsFrame rate Auto exposure & exposure sliderRestore ResetSave Auto White balanceAudio controls Using the applications VLoungeMSN messenger AOL Instant Messenger Yahoo! MessengerTo initiate a video chat Microsoft NetMeetingTo respond to an incoming call Making snapshots using Windows XPVGA Cmos Technical specificationsImportant information DisclaimerFCC compliance Environmental information Disclaimer of warrantyInformation to the consumer System requirementsHelpline Need Help?Country Telephone number Type SPC 900NC Warranty