Using Surround Sound
3Rotate the BASS/TREBLE digital processing control knob to select “BASS” or “TREBLE”.
4Use the TONE LEVEL digital processing control knob to raise or lower the level.
5Repeat steps 3 and 4 as necessary to obtain the tone you desire.
You can turn off the tone adjustments without erasing them
Press EQ/TONE ON/OFF on the remote to turn the tone parameter off or on. The tone adjustments and on/ off setting are stored in each sound field.
Adjusting surround sound parameters
Change the surround parameters to fit your listening situation. Refer to the chart on the next page for parameters you can adjust in each sound field.
To adjust the parameters of the PRO LOGIC sound field, see “Getting the Most Out of Dolby Pro Logic Surround Sound” on page 15.
1Press DPC MODE repeatedly until the SURROUND indicator lights up.
2Use the PARAMETER digital processing control knob to select the parameter you want.
3Use the LEVEL digital processing control knob to adjust the level of the parameter.
The adjusted parameters are stored automatically.
Note
If you make new adjustments to a sound field, the previous settings are replaced by the new ones.
Resetting customized sound fields to the factory settings
1If the power is on, press POWER to turn off the power.
2Hold down SOUND FIELD ON/OFF and press
POWER.
“SURR CLEAR!” appears in the display and all the sound fields are reset at once.
