Amplifier Operations
1Select the FUNCTION you want to label.
2Press DPC MODE repeatedly until the INDEX indicator lights up.
3Create an index name by using the DIGITAL PROCESSING CONTROL knobs as follows: Turn CHARACTER to select a character, then turn POSITION to move the cursor to the next position.
To insert a space, turn CHARACTER until a blank space appears in the display, the space is between " and A.
The index is stored automatically.
If you’ve made a mistake
Turn POSITION until the character you want to change flashes. Then select the right character.
You can display either the index or function name
Each time you press DISPLAY, the display switches between the function name and the index name.
Recording
This amplifier makes it easy to record to and from the components connected to the amplifier. You don’t have to connect playback and recording components directly: once you select a program source on the amplifier, you can record and edit as you normally would using the controls on each component.
Before you begin, make sure you’ve connected all components properly.
MODE FUNCTION
|
|
|
|
|
| ç | c |
|
| |
ç | c |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
Playback component |
| Recording component | ||||||||
(program source) |
| (tape deck, DAT deck, | ||||||||
|
|
|
|
|
| MD deck, VCR) | ||||
|
|
|
|
| ||||||
ç: Audio signal flow
c: Video signal flow
Recording on an audio tape or MiniDisc
You can record on a cassette tape, Digital Audio Tape or MiniDisc using the amplifier. See the instruction manual of your cassette deck, DAT deck, or MD deck if you need help.
1Turn FUNCTION to select the program source to be recorded.
2Set the component to be ready for playing. For example, insert a CD into the CD player.
3Insert a blank tape into the recording deck and adjust the recording level, if necessary.
4Start recording on the recording deck and then start playing the component.
You can monitor the sound being recorded
If you connected a
Note
When you record on a DAT or MD connected to the DAT/ MD REC OUT jacks, sound adjustments do not effect the recording.
Recording on a video tape
You can record from a VCR, a TV, or a LD player using the amplifier. You can also add audio from a variety of audio sources when editing a video tape. See your VCR or LD player’s instruction manual if you need help.
1Turn FUNCTION to select the program source to be recorded.
2Set the component to be ready for playing. For example, insert the laser disc you want to record from into the LD player.
3Insert a blank video tape into the recording VCR (VIDEO 1 or VIDEO 2).
4Start recording on the recording VCR and then start playing the video tape or laser disc you want to record.
(continued)
