EN
1x click
Installation
Putting the WebCam into operation mode
1Bend the WebCam neck into the desired position.
2Switch on the WebCam ( 
) by sliding the lens cover (light switch) one click downwards ( 
).
>The WebCam is now in operation mode but will only function when the applications are started up.
See chapter ‘Using the applications’.
• If desired you can switch on the front light / keyboard light ( 
) by sliding the light switch (lens cover) one more click downwards ( 
).
To switch off the front light / keyboard light ( 
), slide the light switch (lens cover) one click upward.
2x click
Notes!
–When using the WebCam be sure to slide the lens cover (light switch) at least one click downwards ( 
).
–When the WebCam is not in use, be sure to slide the lens cover (light switch) all the way up (two clicks) to protect the lens.
10