Philips SPC610NC user manual Things you should know, Safety precautions, Copyright

Page 7

Things you should know

EN

Please read the following instructions carefully, and retain them for future reference. It may be helpful to have the instructions for use for the laptop or notebook at hand for reference.

Safety precautions

Observe the following guidelines to ensure that the WebCam will operate safely and to prevent defects.

Do not use your WebCam in environments outside the following range: temperature: 0°C to 40°C, relative humidity: 45% ~ 85%.

Do not use or store your WebCam in/under:

direct sunlight exposure;

very humid and dusty environment;

near any kind of heat sources;

If your WebCam gets wet, dry it with soft cloth as soon as possible.

If the lens is dirty Do NOT touch the lens with your fingers.

Clean the outside of the WebCam with a soft cloth.

Do NOT use cleaning fluids based on alcohol, methylated spirit, ammonia, etc.

Do NOT attempt to disassemble or repair your WebCam by yourself. Do not open the WebCam. In the event of technical difficulties return it to your Philips retailer.

Do NOT use your WebCam in the water.

Protect the WebCam from oil, vapour, steam, moisture, and dust.

Never point the WebCam lens at the sun.

Copyright

Copyright© 2003 by Philips Consumer Electronics B.V. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without prior written permission from Philips. Brands and product names are trademarks or registered trademarks of their respective companies.

7

Image 7
Contents SPC610NC Need help? What’s in the box? Allows you to direct the WebCam in any desired position WebCam lens Front light / keyboard lightContents Welcome Things you should know Safety precautionsCopyright Installing the WebCam software ENInstallationYou can now connect your laptop WebCam InstallationConnecting the WebCam to your laptop Click on Finish2x click Putting the WebCam into operation modeGeneral controls WebCam settingsFlickerless Frame rate Techniques active within full automatic control mode arePicture controls Full automatic control on/offAuto Exposure & Exposure slider Brightness Brightness enables you to adjust the brightnessUse the slider to find your preferred setting Gamma enables you to brighten dark areas withinVLounge Using the applicationsSkype Yahoo! Messenger MSN MessengerAOL Instant Messenger Making snapshots using Windows XPTechnical specifications This device may not cause harmful interference, Important informationDisclaimer FCC complianceLimitations of damages Disclaimer of warrantyEnvironmental information System requirementsData subject to change without notice